Front Audio/Mic Jack Panel Not working in Windows 8
up vote
0
down vote
favorite
My brother recently bought a locally assembled desktop PC. But since he bought the PC the audio and mic jacks in the front panel doesn't seem to work while the ones at the back works fine. Also the USB ports in the front panel works fine.
He is running Win 8 32-bit. I couldn't find Realtek audio manager in it which I searched in the tiles view. Please suggest on how to get it working.
windows-8 audio microphone
add a comment |
up vote
0
down vote
favorite
My brother recently bought a locally assembled desktop PC. But since he bought the PC the audio and mic jacks in the front panel doesn't seem to work while the ones at the back works fine. Also the USB ports in the front panel works fine.
He is running Win 8 32-bit. I couldn't find Realtek audio manager in it which I searched in the tiles view. Please suggest on how to get it working.
windows-8 audio microphone
I am not sure why. Maybe he didn't find it big of an fault to to take it back. Currently he has very little use of the front port I guess.
– BharathYes
Jan 14 '17 at 17:21
add a comment |
up vote
0
down vote
favorite
up vote
0
down vote
favorite
My brother recently bought a locally assembled desktop PC. But since he bought the PC the audio and mic jacks in the front panel doesn't seem to work while the ones at the back works fine. Also the USB ports in the front panel works fine.
He is running Win 8 32-bit. I couldn't find Realtek audio manager in it which I searched in the tiles view. Please suggest on how to get it working.
windows-8 audio microphone
My brother recently bought a locally assembled desktop PC. But since he bought the PC the audio and mic jacks in the front panel doesn't seem to work while the ones at the back works fine. Also the USB ports in the front panel works fine.
He is running Win 8 32-bit. I couldn't find Realtek audio manager in it which I searched in the tiles view. Please suggest on how to get it working.
windows-8 audio microphone
windows-8 audio microphone
edited Mar 24 '15 at 4:06
Sathya♦
52.5k29153252
52.5k29153252
asked Oct 5 '14 at 6:18
BharathYes
624
624
I am not sure why. Maybe he didn't find it big of an fault to to take it back. Currently he has very little use of the front port I guess.
– BharathYes
Jan 14 '17 at 17:21
add a comment |
I am not sure why. Maybe he didn't find it big of an fault to to take it back. Currently he has very little use of the front port I guess.
– BharathYes
Jan 14 '17 at 17:21
I am not sure why. Maybe he didn't find it big of an fault to to take it back. Currently he has very little use of the front port I guess.
– BharathYes
Jan 14 '17 at 17:21
I am not sure why. Maybe he didn't find it big of an fault to to take it back. Currently he has very little use of the front port I guess.
– BharathYes
Jan 14 '17 at 17:21
add a comment |
1 Answer
1
active
oldest
votes
up vote
0
down vote
Did you look inside first , and see if the front pannel audio line is connected to the audio header on the motherboard?
Check the windows "device manager" for the realtek audio device (sound and video section). In the drivers section of the properties, look at the "driver details".
If the software is installed realtek improperly places all the executables and paths in there, that is one clue to thier software being installed and the location.
If it is drivers only package picked up from MSupdates or off the OS install, it may have operational sound without features.
Because realtek uses "port sence" methods which rely on drivers that are getting info from the hardware, it is possible that the system is not being clued in on the connected item. You then would install the proper driver&software package for the audio chipset. Drivers and software are best aquired via the manufacture of the motherboard who implements that audio chipset, and also supplies drivers/software for the correct audio chip.
Then in Control pannel Sound , in the "playback" and "recording" sections, Right Click and you can observe that items can be hidden. disconnected devices can be shown. Then proceed to double left click on playback and recording devices. For realtek in the "General" tab if an plugged in item is detected, it will then show up in the "Jack Information". This does not require getting to the realtek software, because they show up when the rest of the software is installed in the windows sound tabs.
When the item is connected (or some part of them) they are senced at that port (the hardware thinks something is plugged) This sencing does not always work as planned, it is probably based on seeing resistance there, and not all headphones and mics show the same to the hardware. An example might be (never tested it myself) high ohm headsets might not be detected, and require settings things manually using the software.
In the realtek HD Audio manager, check the Preferances button, on this version it lools like a Gear, there are critical swithes inside there that effect the abilites of the front pannel operations, and even other inputs/outputs that can be used as Recording inputs. Very huge changes via those few switches in there. You of course have to have the software istalled. I just discovered myself how that effects front panel and input capabilites.
i tried looking in through the vents and a bunch of wires are connected to a connenctor labeled F.audio and it goes to the front of CPu, but I cant look where it terminates. I don't want to open it up. And I cant find any labelled as Realtec in Device manager.
– BharathYes
Oct 5 '14 at 8:15
it can also come under the name "high Definition Audio" , of course so does everything else :-) the realtek part is more likely to be added when a whole and proper driver is installed. Check your "Programs and Features" for any installed drivers you may want to remove prior to lapping in another one, then install the driver and software? I do not know what else to tell ya. Sometimes people will put in any ol driver that works, or they find on the web or via the system. More people get better results with the exact right driver as stated above. (some do better with a windows update driver).
– Psycogeek
Oct 5 '14 at 8:21
add a comment |
1 Answer
1
active
oldest
votes
1 Answer
1
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
Did you look inside first , and see if the front pannel audio line is connected to the audio header on the motherboard?
Check the windows "device manager" for the realtek audio device (sound and video section). In the drivers section of the properties, look at the "driver details".
If the software is installed realtek improperly places all the executables and paths in there, that is one clue to thier software being installed and the location.
If it is drivers only package picked up from MSupdates or off the OS install, it may have operational sound without features.
Because realtek uses "port sence" methods which rely on drivers that are getting info from the hardware, it is possible that the system is not being clued in on the connected item. You then would install the proper driver&software package for the audio chipset. Drivers and software are best aquired via the manufacture of the motherboard who implements that audio chipset, and also supplies drivers/software for the correct audio chip.
Then in Control pannel Sound , in the "playback" and "recording" sections, Right Click and you can observe that items can be hidden. disconnected devices can be shown. Then proceed to double left click on playback and recording devices. For realtek in the "General" tab if an plugged in item is detected, it will then show up in the "Jack Information". This does not require getting to the realtek software, because they show up when the rest of the software is installed in the windows sound tabs.
When the item is connected (or some part of them) they are senced at that port (the hardware thinks something is plugged) This sencing does not always work as planned, it is probably based on seeing resistance there, and not all headphones and mics show the same to the hardware. An example might be (never tested it myself) high ohm headsets might not be detected, and require settings things manually using the software.
In the realtek HD Audio manager, check the Preferances button, on this version it lools like a Gear, there are critical swithes inside there that effect the abilites of the front pannel operations, and even other inputs/outputs that can be used as Recording inputs. Very huge changes via those few switches in there. You of course have to have the software istalled. I just discovered myself how that effects front panel and input capabilites.
i tried looking in through the vents and a bunch of wires are connected to a connenctor labeled F.audio and it goes to the front of CPu, but I cant look where it terminates. I don't want to open it up. And I cant find any labelled as Realtec in Device manager.
– BharathYes
Oct 5 '14 at 8:15
it can also come under the name "high Definition Audio" , of course so does everything else :-) the realtek part is more likely to be added when a whole and proper driver is installed. Check your "Programs and Features" for any installed drivers you may want to remove prior to lapping in another one, then install the driver and software? I do not know what else to tell ya. Sometimes people will put in any ol driver that works, or they find on the web or via the system. More people get better results with the exact right driver as stated above. (some do better with a windows update driver).
– Psycogeek
Oct 5 '14 at 8:21
add a comment |
up vote
0
down vote
Did you look inside first , and see if the front pannel audio line is connected to the audio header on the motherboard?
Check the windows "device manager" for the realtek audio device (sound and video section). In the drivers section of the properties, look at the "driver details".
If the software is installed realtek improperly places all the executables and paths in there, that is one clue to thier software being installed and the location.
If it is drivers only package picked up from MSupdates or off the OS install, it may have operational sound without features.
Because realtek uses "port sence" methods which rely on drivers that are getting info from the hardware, it is possible that the system is not being clued in on the connected item. You then would install the proper driver&software package for the audio chipset. Drivers and software are best aquired via the manufacture of the motherboard who implements that audio chipset, and also supplies drivers/software for the correct audio chip.
Then in Control pannel Sound , in the "playback" and "recording" sections, Right Click and you can observe that items can be hidden. disconnected devices can be shown. Then proceed to double left click on playback and recording devices. For realtek in the "General" tab if an plugged in item is detected, it will then show up in the "Jack Information". This does not require getting to the realtek software, because they show up when the rest of the software is installed in the windows sound tabs.
When the item is connected (or some part of them) they are senced at that port (the hardware thinks something is plugged) This sencing does not always work as planned, it is probably based on seeing resistance there, and not all headphones and mics show the same to the hardware. An example might be (never tested it myself) high ohm headsets might not be detected, and require settings things manually using the software.
In the realtek HD Audio manager, check the Preferances button, on this version it lools like a Gear, there are critical swithes inside there that effect the abilites of the front pannel operations, and even other inputs/outputs that can be used as Recording inputs. Very huge changes via those few switches in there. You of course have to have the software istalled. I just discovered myself how that effects front panel and input capabilites.
i tried looking in through the vents and a bunch of wires are connected to a connenctor labeled F.audio and it goes to the front of CPu, but I cant look where it terminates. I don't want to open it up. And I cant find any labelled as Realtec in Device manager.
– BharathYes
Oct 5 '14 at 8:15
it can also come under the name "high Definition Audio" , of course so does everything else :-) the realtek part is more likely to be added when a whole and proper driver is installed. Check your "Programs and Features" for any installed drivers you may want to remove prior to lapping in another one, then install the driver and software? I do not know what else to tell ya. Sometimes people will put in any ol driver that works, or they find on the web or via the system. More people get better results with the exact right driver as stated above. (some do better with a windows update driver).
– Psycogeek
Oct 5 '14 at 8:21
add a comment |
up vote
0
down vote
up vote
0
down vote
Did you look inside first , and see if the front pannel audio line is connected to the audio header on the motherboard?
Check the windows "device manager" for the realtek audio device (sound and video section). In the drivers section of the properties, look at the "driver details".
If the software is installed realtek improperly places all the executables and paths in there, that is one clue to thier software being installed and the location.
If it is drivers only package picked up from MSupdates or off the OS install, it may have operational sound without features.
Because realtek uses "port sence" methods which rely on drivers that are getting info from the hardware, it is possible that the system is not being clued in on the connected item. You then would install the proper driver&software package for the audio chipset. Drivers and software are best aquired via the manufacture of the motherboard who implements that audio chipset, and also supplies drivers/software for the correct audio chip.
Then in Control pannel Sound , in the "playback" and "recording" sections, Right Click and you can observe that items can be hidden. disconnected devices can be shown. Then proceed to double left click on playback and recording devices. For realtek in the "General" tab if an plugged in item is detected, it will then show up in the "Jack Information". This does not require getting to the realtek software, because they show up when the rest of the software is installed in the windows sound tabs.
When the item is connected (or some part of them) they are senced at that port (the hardware thinks something is plugged) This sencing does not always work as planned, it is probably based on seeing resistance there, and not all headphones and mics show the same to the hardware. An example might be (never tested it myself) high ohm headsets might not be detected, and require settings things manually using the software.
In the realtek HD Audio manager, check the Preferances button, on this version it lools like a Gear, there are critical swithes inside there that effect the abilites of the front pannel operations, and even other inputs/outputs that can be used as Recording inputs. Very huge changes via those few switches in there. You of course have to have the software istalled. I just discovered myself how that effects front panel and input capabilites.
Did you look inside first , and see if the front pannel audio line is connected to the audio header on the motherboard?
Check the windows "device manager" for the realtek audio device (sound and video section). In the drivers section of the properties, look at the "driver details".
If the software is installed realtek improperly places all the executables and paths in there, that is one clue to thier software being installed and the location.
If it is drivers only package picked up from MSupdates or off the OS install, it may have operational sound without features.
Because realtek uses "port sence" methods which rely on drivers that are getting info from the hardware, it is possible that the system is not being clued in on the connected item. You then would install the proper driver&software package for the audio chipset. Drivers and software are best aquired via the manufacture of the motherboard who implements that audio chipset, and also supplies drivers/software for the correct audio chip.
Then in Control pannel Sound , in the "playback" and "recording" sections, Right Click and you can observe that items can be hidden. disconnected devices can be shown. Then proceed to double left click on playback and recording devices. For realtek in the "General" tab if an plugged in item is detected, it will then show up in the "Jack Information". This does not require getting to the realtek software, because they show up when the rest of the software is installed in the windows sound tabs.
When the item is connected (or some part of them) they are senced at that port (the hardware thinks something is plugged) This sencing does not always work as planned, it is probably based on seeing resistance there, and not all headphones and mics show the same to the hardware. An example might be (never tested it myself) high ohm headsets might not be detected, and require settings things manually using the software.
In the realtek HD Audio manager, check the Preferances button, on this version it lools like a Gear, there are critical swithes inside there that effect the abilites of the front pannel operations, and even other inputs/outputs that can be used as Recording inputs. Very huge changes via those few switches in there. You of course have to have the software istalled. I just discovered myself how that effects front panel and input capabilites.
edited Oct 9 '14 at 16:59
answered Oct 5 '14 at 6:36
Psycogeek
7,29763970
7,29763970
i tried looking in through the vents and a bunch of wires are connected to a connenctor labeled F.audio and it goes to the front of CPu, but I cant look where it terminates. I don't want to open it up. And I cant find any labelled as Realtec in Device manager.
– BharathYes
Oct 5 '14 at 8:15
it can also come under the name "high Definition Audio" , of course so does everything else :-) the realtek part is more likely to be added when a whole and proper driver is installed. Check your "Programs and Features" for any installed drivers you may want to remove prior to lapping in another one, then install the driver and software? I do not know what else to tell ya. Sometimes people will put in any ol driver that works, or they find on the web or via the system. More people get better results with the exact right driver as stated above. (some do better with a windows update driver).
– Psycogeek
Oct 5 '14 at 8:21
add a comment |
i tried looking in through the vents and a bunch of wires are connected to a connenctor labeled F.audio and it goes to the front of CPu, but I cant look where it terminates. I don't want to open it up. And I cant find any labelled as Realtec in Device manager.
– BharathYes
Oct 5 '14 at 8:15
it can also come under the name "high Definition Audio" , of course so does everything else :-) the realtek part is more likely to be added when a whole and proper driver is installed. Check your "Programs and Features" for any installed drivers you may want to remove prior to lapping in another one, then install the driver and software? I do not know what else to tell ya. Sometimes people will put in any ol driver that works, or they find on the web or via the system. More people get better results with the exact right driver as stated above. (some do better with a windows update driver).
– Psycogeek
Oct 5 '14 at 8:21
i tried looking in through the vents and a bunch of wires are connected to a connenctor labeled F.audio and it goes to the front of CPu, but I cant look where it terminates. I don't want to open it up. And I cant find any labelled as Realtec in Device manager.
– BharathYes
Oct 5 '14 at 8:15
i tried looking in through the vents and a bunch of wires are connected to a connenctor labeled F.audio and it goes to the front of CPu, but I cant look where it terminates. I don't want to open it up. And I cant find any labelled as Realtec in Device manager.
– BharathYes
Oct 5 '14 at 8:15
it can also come under the name "high Definition Audio" , of course so does everything else :-) the realtek part is more likely to be added when a whole and proper driver is installed. Check your "Programs and Features" for any installed drivers you may want to remove prior to lapping in another one, then install the driver and software? I do not know what else to tell ya. Sometimes people will put in any ol driver that works, or they find on the web or via the system. More people get better results with the exact right driver as stated above. (some do better with a windows update driver).
– Psycogeek
Oct 5 '14 at 8:21
it can also come under the name "high Definition Audio" , of course so does everything else :-) the realtek part is more likely to be added when a whole and proper driver is installed. Check your "Programs and Features" for any installed drivers you may want to remove prior to lapping in another one, then install the driver and software? I do not know what else to tell ya. Sometimes people will put in any ol driver that works, or they find on the web or via the system. More people get better results with the exact right driver as stated above. (some do better with a windows update driver).
– Psycogeek
Oct 5 '14 at 8:21
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f821022%2ffront-audio-mic-jack-panel-not-working-in-windows-8%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
I am not sure why. Maybe he didn't find it big of an fault to to take it back. Currently he has very little use of the front port I guess.
– BharathYes
Jan 14 '17 at 17:21