Graphics card issues? Green lines and distortion on my screens












1














I turned on my computer this morning and it had a bunch of vertical green artefacts and some horizontal distortions on text.



You can see what it looks like http://imgur.com/9jRoVQp



I assume it's the graphics card but I'm unsure, I've removed all dust inside and replaced thermal compound on my gpu, I'll replace the thermal compound on the cpu if anyone thinks it could be the cup.



The graphics card it's an HIS AMD Radeon HD6850 which is a PCI-e 2.1 card with 1x DisplayPort, 1x HDMI, 2x DVI.



The rest of the computer is an ASUS P5Q-PRO motherboard with 8GB of Corsair DDR2 800mhz memory with an Intel Quad2Core Q9550 CPU.



I have 6 hard drives connected, 2 being SSDS and the power supply is a Corsair TX750W.



Does any one have any suggestions, ideas or thoughts.



I've had a look online and noticed "reflowing" graphics cards but don't quite understand what to do. If the card is dead I might as well try it because on a bunch of websites they say that reflowing gpus can fix core failures or/and gpu memory failures.



Thanks










share|improve this question
























  • Reflowing refers to heating up the card so that the solder melts just a little. It's the kind of thing Electronics Engineering grads do, not for you or I to try because it's kind of nuts. I also had an EE roommate once who'd put his video card in the freezer for about 15 minutes - kind of the opposite of reflowing, make everything contract. That seemed to work for him. Again for non-EE's it's sort of an insane thing to try, could result in a fire or worse, etc. Please don't attempt to 'reflow' anything. Edit to add: The freezer thing worked for that particular card. Still don't do it.
    – Mark Allen
    Jul 16 '14 at 20:54












  • Yeah, definitely the GPU card. Normally I would think of drivers, but given that your screenshot actually shows the pre-boot state, its definitely a faulty card.
    – LPChip
    Jul 16 '14 at 21:03










  • @MarkAllen Reflowing isn't that scary if the card is no good anyway. This video here shows the process from start to finish of reflowing a card very similar to yours.
    – Michael Frank
    Jul 17 '14 at 0:29










  • @MarkAllen I reflowed and currently its working perfectly, the fan is a bit dodgy but I've got a desktop fan facing inside at the moment and going to buy a spare gpu fan online to see if that helps as I think it was a fan failure that caused it to overheat and die
    – Hyflex
    Jul 18 '14 at 23:42
















1














I turned on my computer this morning and it had a bunch of vertical green artefacts and some horizontal distortions on text.



You can see what it looks like http://imgur.com/9jRoVQp



I assume it's the graphics card but I'm unsure, I've removed all dust inside and replaced thermal compound on my gpu, I'll replace the thermal compound on the cpu if anyone thinks it could be the cup.



The graphics card it's an HIS AMD Radeon HD6850 which is a PCI-e 2.1 card with 1x DisplayPort, 1x HDMI, 2x DVI.



The rest of the computer is an ASUS P5Q-PRO motherboard with 8GB of Corsair DDR2 800mhz memory with an Intel Quad2Core Q9550 CPU.



I have 6 hard drives connected, 2 being SSDS and the power supply is a Corsair TX750W.



Does any one have any suggestions, ideas or thoughts.



I've had a look online and noticed "reflowing" graphics cards but don't quite understand what to do. If the card is dead I might as well try it because on a bunch of websites they say that reflowing gpus can fix core failures or/and gpu memory failures.



Thanks










share|improve this question
























  • Reflowing refers to heating up the card so that the solder melts just a little. It's the kind of thing Electronics Engineering grads do, not for you or I to try because it's kind of nuts. I also had an EE roommate once who'd put his video card in the freezer for about 15 minutes - kind of the opposite of reflowing, make everything contract. That seemed to work for him. Again for non-EE's it's sort of an insane thing to try, could result in a fire or worse, etc. Please don't attempt to 'reflow' anything. Edit to add: The freezer thing worked for that particular card. Still don't do it.
    – Mark Allen
    Jul 16 '14 at 20:54












  • Yeah, definitely the GPU card. Normally I would think of drivers, but given that your screenshot actually shows the pre-boot state, its definitely a faulty card.
    – LPChip
    Jul 16 '14 at 21:03










  • @MarkAllen Reflowing isn't that scary if the card is no good anyway. This video here shows the process from start to finish of reflowing a card very similar to yours.
    – Michael Frank
    Jul 17 '14 at 0:29










  • @MarkAllen I reflowed and currently its working perfectly, the fan is a bit dodgy but I've got a desktop fan facing inside at the moment and going to buy a spare gpu fan online to see if that helps as I think it was a fan failure that caused it to overheat and die
    – Hyflex
    Jul 18 '14 at 23:42














1












1








1







I turned on my computer this morning and it had a bunch of vertical green artefacts and some horizontal distortions on text.



You can see what it looks like http://imgur.com/9jRoVQp



I assume it's the graphics card but I'm unsure, I've removed all dust inside and replaced thermal compound on my gpu, I'll replace the thermal compound on the cpu if anyone thinks it could be the cup.



The graphics card it's an HIS AMD Radeon HD6850 which is a PCI-e 2.1 card with 1x DisplayPort, 1x HDMI, 2x DVI.



The rest of the computer is an ASUS P5Q-PRO motherboard with 8GB of Corsair DDR2 800mhz memory with an Intel Quad2Core Q9550 CPU.



I have 6 hard drives connected, 2 being SSDS and the power supply is a Corsair TX750W.



Does any one have any suggestions, ideas or thoughts.



I've had a look online and noticed "reflowing" graphics cards but don't quite understand what to do. If the card is dead I might as well try it because on a bunch of websites they say that reflowing gpus can fix core failures or/and gpu memory failures.



Thanks










share|improve this question















I turned on my computer this morning and it had a bunch of vertical green artefacts and some horizontal distortions on text.



You can see what it looks like http://imgur.com/9jRoVQp



I assume it's the graphics card but I'm unsure, I've removed all dust inside and replaced thermal compound on my gpu, I'll replace the thermal compound on the cpu if anyone thinks it could be the cup.



The graphics card it's an HIS AMD Radeon HD6850 which is a PCI-e 2.1 card with 1x DisplayPort, 1x HDMI, 2x DVI.



The rest of the computer is an ASUS P5Q-PRO motherboard with 8GB of Corsair DDR2 800mhz memory with an Intel Quad2Core Q9550 CPU.



I have 6 hard drives connected, 2 being SSDS and the power supply is a Corsair TX750W.



Does any one have any suggestions, ideas or thoughts.



I've had a look online and noticed "reflowing" graphics cards but don't quite understand what to do. If the card is dead I might as well try it because on a bunch of websites they say that reflowing gpus can fix core failures or/and gpu memory failures.



Thanks







graphics-card hardware-failure gpu boot






share|improve this question















share|improve this question













share|improve this question




share|improve this question








edited Jul 17 '14 at 4:00









magicandre1981

81k20124203




81k20124203










asked Jul 16 '14 at 20:13









Hyflex

791318




791318












  • Reflowing refers to heating up the card so that the solder melts just a little. It's the kind of thing Electronics Engineering grads do, not for you or I to try because it's kind of nuts. I also had an EE roommate once who'd put his video card in the freezer for about 15 minutes - kind of the opposite of reflowing, make everything contract. That seemed to work for him. Again for non-EE's it's sort of an insane thing to try, could result in a fire or worse, etc. Please don't attempt to 'reflow' anything. Edit to add: The freezer thing worked for that particular card. Still don't do it.
    – Mark Allen
    Jul 16 '14 at 20:54












  • Yeah, definitely the GPU card. Normally I would think of drivers, but given that your screenshot actually shows the pre-boot state, its definitely a faulty card.
    – LPChip
    Jul 16 '14 at 21:03










  • @MarkAllen Reflowing isn't that scary if the card is no good anyway. This video here shows the process from start to finish of reflowing a card very similar to yours.
    – Michael Frank
    Jul 17 '14 at 0:29










  • @MarkAllen I reflowed and currently its working perfectly, the fan is a bit dodgy but I've got a desktop fan facing inside at the moment and going to buy a spare gpu fan online to see if that helps as I think it was a fan failure that caused it to overheat and die
    – Hyflex
    Jul 18 '14 at 23:42


















  • Reflowing refers to heating up the card so that the solder melts just a little. It's the kind of thing Electronics Engineering grads do, not for you or I to try because it's kind of nuts. I also had an EE roommate once who'd put his video card in the freezer for about 15 minutes - kind of the opposite of reflowing, make everything contract. That seemed to work for him. Again for non-EE's it's sort of an insane thing to try, could result in a fire or worse, etc. Please don't attempt to 'reflow' anything. Edit to add: The freezer thing worked for that particular card. Still don't do it.
    – Mark Allen
    Jul 16 '14 at 20:54












  • Yeah, definitely the GPU card. Normally I would think of drivers, but given that your screenshot actually shows the pre-boot state, its definitely a faulty card.
    – LPChip
    Jul 16 '14 at 21:03










  • @MarkAllen Reflowing isn't that scary if the card is no good anyway. This video here shows the process from start to finish of reflowing a card very similar to yours.
    – Michael Frank
    Jul 17 '14 at 0:29










  • @MarkAllen I reflowed and currently its working perfectly, the fan is a bit dodgy but I've got a desktop fan facing inside at the moment and going to buy a spare gpu fan online to see if that helps as I think it was a fan failure that caused it to overheat and die
    – Hyflex
    Jul 18 '14 at 23:42
















Reflowing refers to heating up the card so that the solder melts just a little. It's the kind of thing Electronics Engineering grads do, not for you or I to try because it's kind of nuts. I also had an EE roommate once who'd put his video card in the freezer for about 15 minutes - kind of the opposite of reflowing, make everything contract. That seemed to work for him. Again for non-EE's it's sort of an insane thing to try, could result in a fire or worse, etc. Please don't attempt to 'reflow' anything. Edit to add: The freezer thing worked for that particular card. Still don't do it.
– Mark Allen
Jul 16 '14 at 20:54






Reflowing refers to heating up the card so that the solder melts just a little. It's the kind of thing Electronics Engineering grads do, not for you or I to try because it's kind of nuts. I also had an EE roommate once who'd put his video card in the freezer for about 15 minutes - kind of the opposite of reflowing, make everything contract. That seemed to work for him. Again for non-EE's it's sort of an insane thing to try, could result in a fire or worse, etc. Please don't attempt to 'reflow' anything. Edit to add: The freezer thing worked for that particular card. Still don't do it.
– Mark Allen
Jul 16 '14 at 20:54














Yeah, definitely the GPU card. Normally I would think of drivers, but given that your screenshot actually shows the pre-boot state, its definitely a faulty card.
– LPChip
Jul 16 '14 at 21:03




Yeah, definitely the GPU card. Normally I would think of drivers, but given that your screenshot actually shows the pre-boot state, its definitely a faulty card.
– LPChip
Jul 16 '14 at 21:03












@MarkAllen Reflowing isn't that scary if the card is no good anyway. This video here shows the process from start to finish of reflowing a card very similar to yours.
– Michael Frank
Jul 17 '14 at 0:29




@MarkAllen Reflowing isn't that scary if the card is no good anyway. This video here shows the process from start to finish of reflowing a card very similar to yours.
– Michael Frank
Jul 17 '14 at 0:29












@MarkAllen I reflowed and currently its working perfectly, the fan is a bit dodgy but I've got a desktop fan facing inside at the moment and going to buy a spare gpu fan online to see if that helps as I think it was a fan failure that caused it to overheat and die
– Hyflex
Jul 18 '14 at 23:42




@MarkAllen I reflowed and currently its working perfectly, the fan is a bit dodgy but I've got a desktop fan facing inside at the moment and going to buy a spare gpu fan online to see if that helps as I think it was a fan failure that caused it to overheat and die
– Hyflex
Jul 18 '14 at 23:42










1 Answer
1






active

oldest

votes


















0














I replaced cards for a graphic artist a while back for a similar reason... Hers had black lines and distortion instead of green. That did solve it... A bad video cable can do things like that too. I would try that first.






share|improve this answer





















  • Before buying is it possible to test with a different cable and monitor? That would reveal much.
    – Jeff Clayton
    Jul 16 '14 at 20:26












  • I have three monitors connected, all three have the same issue well actual only two because the one that's connected to the dvi port doesn't even turn on / show anything.
    – Hyflex
    Jul 16 '14 at 20:31










  • Sounds like the card then.
    – Jeff Clayton
    Jul 16 '14 at 20:32










  • I reflowed the card and so far its working fine :D
    – Hyflex
    Jul 18 '14 at 23:41











Your Answer








StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "3"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
autoActivateHeartbeat: false,
convertImagesToLinks: true,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: 10,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f784071%2fgraphics-card-issues-green-lines-and-distortion-on-my-screens%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























1 Answer
1






active

oldest

votes








1 Answer
1






active

oldest

votes









active

oldest

votes






active

oldest

votes









0














I replaced cards for a graphic artist a while back for a similar reason... Hers had black lines and distortion instead of green. That did solve it... A bad video cable can do things like that too. I would try that first.






share|improve this answer





















  • Before buying is it possible to test with a different cable and monitor? That would reveal much.
    – Jeff Clayton
    Jul 16 '14 at 20:26












  • I have three monitors connected, all three have the same issue well actual only two because the one that's connected to the dvi port doesn't even turn on / show anything.
    – Hyflex
    Jul 16 '14 at 20:31










  • Sounds like the card then.
    – Jeff Clayton
    Jul 16 '14 at 20:32










  • I reflowed the card and so far its working fine :D
    – Hyflex
    Jul 18 '14 at 23:41
















0














I replaced cards for a graphic artist a while back for a similar reason... Hers had black lines and distortion instead of green. That did solve it... A bad video cable can do things like that too. I would try that first.






share|improve this answer





















  • Before buying is it possible to test with a different cable and monitor? That would reveal much.
    – Jeff Clayton
    Jul 16 '14 at 20:26












  • I have three monitors connected, all three have the same issue well actual only two because the one that's connected to the dvi port doesn't even turn on / show anything.
    – Hyflex
    Jul 16 '14 at 20:31










  • Sounds like the card then.
    – Jeff Clayton
    Jul 16 '14 at 20:32










  • I reflowed the card and so far its working fine :D
    – Hyflex
    Jul 18 '14 at 23:41














0












0








0






I replaced cards for a graphic artist a while back for a similar reason... Hers had black lines and distortion instead of green. That did solve it... A bad video cable can do things like that too. I would try that first.






share|improve this answer












I replaced cards for a graphic artist a while back for a similar reason... Hers had black lines and distortion instead of green. That did solve it... A bad video cable can do things like that too. I would try that first.







share|improve this answer












share|improve this answer



share|improve this answer










answered Jul 16 '14 at 20:23









Jeff Clayton

908626




908626












  • Before buying is it possible to test with a different cable and monitor? That would reveal much.
    – Jeff Clayton
    Jul 16 '14 at 20:26












  • I have three monitors connected, all three have the same issue well actual only two because the one that's connected to the dvi port doesn't even turn on / show anything.
    – Hyflex
    Jul 16 '14 at 20:31










  • Sounds like the card then.
    – Jeff Clayton
    Jul 16 '14 at 20:32










  • I reflowed the card and so far its working fine :D
    – Hyflex
    Jul 18 '14 at 23:41


















  • Before buying is it possible to test with a different cable and monitor? That would reveal much.
    – Jeff Clayton
    Jul 16 '14 at 20:26












  • I have three monitors connected, all three have the same issue well actual only two because the one that's connected to the dvi port doesn't even turn on / show anything.
    – Hyflex
    Jul 16 '14 at 20:31










  • Sounds like the card then.
    – Jeff Clayton
    Jul 16 '14 at 20:32










  • I reflowed the card and so far its working fine :D
    – Hyflex
    Jul 18 '14 at 23:41
















Before buying is it possible to test with a different cable and monitor? That would reveal much.
– Jeff Clayton
Jul 16 '14 at 20:26






Before buying is it possible to test with a different cable and monitor? That would reveal much.
– Jeff Clayton
Jul 16 '14 at 20:26














I have three monitors connected, all three have the same issue well actual only two because the one that's connected to the dvi port doesn't even turn on / show anything.
– Hyflex
Jul 16 '14 at 20:31




I have three monitors connected, all three have the same issue well actual only two because the one that's connected to the dvi port doesn't even turn on / show anything.
– Hyflex
Jul 16 '14 at 20:31












Sounds like the card then.
– Jeff Clayton
Jul 16 '14 at 20:32




Sounds like the card then.
– Jeff Clayton
Jul 16 '14 at 20:32












I reflowed the card and so far its working fine :D
– Hyflex
Jul 18 '14 at 23:41




I reflowed the card and so far its working fine :D
– Hyflex
Jul 18 '14 at 23:41


















draft saved

draft discarded




















































Thanks for contributing an answer to Super User!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.





Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


Please pay close attention to the following guidance:


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f784071%2fgraphics-card-issues-green-lines-and-distortion-on-my-screens%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

AnyDesk - Fatal Program Failure

How to calibrate 16:9 built-in touch-screen to a 4:3 resolution?

QoS: MAC-Priority for clients behind a repeater