How to recognize a tubeless tire?











up vote
15
down vote

favorite












I suspect that the used bike I want to buy might have a tubeless tires, but one is flat. Is there any external feature to look at that would allow easily to tell this for sure?



I have no experience with tubeless tires and would not know how to replace it.










share|improve this question


















  • 6




    Um... ask the seller? And if they don't know, walk away because the bike is stolen. If they say it is tubeless and you like everything else about the bike, why not just learn how to use tubeless? It can't be that hard.
    – David Richerby
    Nov 14 at 9:59












  • It is not properly written in the description from the shop.
    – h22
    Nov 14 at 13:08










  • I somehow feel that the answer of "poke it with a knife and see what happens" might not be the answer you're looking for.... though I can promise you it's got a very high accuracy
    – UKMonkey
    Nov 14 at 14:16








  • 3




    @h22 I'm surprised that a shop would sell a bike with a flat tire.
    – user2259438
    Nov 14 at 15:36






  • 4




    @h22 So... ask the seller? Email or phone them and ask them the specific thing you want to know about the thing they're selling.
    – David Richerby
    Nov 14 at 15:45















up vote
15
down vote

favorite












I suspect that the used bike I want to buy might have a tubeless tires, but one is flat. Is there any external feature to look at that would allow easily to tell this for sure?



I have no experience with tubeless tires and would not know how to replace it.










share|improve this question


















  • 6




    Um... ask the seller? And if they don't know, walk away because the bike is stolen. If they say it is tubeless and you like everything else about the bike, why not just learn how to use tubeless? It can't be that hard.
    – David Richerby
    Nov 14 at 9:59












  • It is not properly written in the description from the shop.
    – h22
    Nov 14 at 13:08










  • I somehow feel that the answer of "poke it with a knife and see what happens" might not be the answer you're looking for.... though I can promise you it's got a very high accuracy
    – UKMonkey
    Nov 14 at 14:16








  • 3




    @h22 I'm surprised that a shop would sell a bike with a flat tire.
    – user2259438
    Nov 14 at 15:36






  • 4




    @h22 So... ask the seller? Email or phone them and ask them the specific thing you want to know about the thing they're selling.
    – David Richerby
    Nov 14 at 15:45













up vote
15
down vote

favorite









up vote
15
down vote

favorite











I suspect that the used bike I want to buy might have a tubeless tires, but one is flat. Is there any external feature to look at that would allow easily to tell this for sure?



I have no experience with tubeless tires and would not know how to replace it.










share|improve this question













I suspect that the used bike I want to buy might have a tubeless tires, but one is flat. Is there any external feature to look at that would allow easily to tell this for sure?



I have no experience with tubeless tires and would not know how to replace it.







tubeless






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked Nov 14 at 8:08









h22

24318




24318








  • 6




    Um... ask the seller? And if they don't know, walk away because the bike is stolen. If they say it is tubeless and you like everything else about the bike, why not just learn how to use tubeless? It can't be that hard.
    – David Richerby
    Nov 14 at 9:59












  • It is not properly written in the description from the shop.
    – h22
    Nov 14 at 13:08










  • I somehow feel that the answer of "poke it with a knife and see what happens" might not be the answer you're looking for.... though I can promise you it's got a very high accuracy
    – UKMonkey
    Nov 14 at 14:16








  • 3




    @h22 I'm surprised that a shop would sell a bike with a flat tire.
    – user2259438
    Nov 14 at 15:36






  • 4




    @h22 So... ask the seller? Email or phone them and ask them the specific thing you want to know about the thing they're selling.
    – David Richerby
    Nov 14 at 15:45














  • 6




    Um... ask the seller? And if they don't know, walk away because the bike is stolen. If they say it is tubeless and you like everything else about the bike, why not just learn how to use tubeless? It can't be that hard.
    – David Richerby
    Nov 14 at 9:59












  • It is not properly written in the description from the shop.
    – h22
    Nov 14 at 13:08










  • I somehow feel that the answer of "poke it with a knife and see what happens" might not be the answer you're looking for.... though I can promise you it's got a very high accuracy
    – UKMonkey
    Nov 14 at 14:16








  • 3




    @h22 I'm surprised that a shop would sell a bike with a flat tire.
    – user2259438
    Nov 14 at 15:36






  • 4




    @h22 So... ask the seller? Email or phone them and ask them the specific thing you want to know about the thing they're selling.
    – David Richerby
    Nov 14 at 15:45








6




6




Um... ask the seller? And if they don't know, walk away because the bike is stolen. If they say it is tubeless and you like everything else about the bike, why not just learn how to use tubeless? It can't be that hard.
– David Richerby
Nov 14 at 9:59






Um... ask the seller? And if they don't know, walk away because the bike is stolen. If they say it is tubeless and you like everything else about the bike, why not just learn how to use tubeless? It can't be that hard.
– David Richerby
Nov 14 at 9:59














It is not properly written in the description from the shop.
– h22
Nov 14 at 13:08




It is not properly written in the description from the shop.
– h22
Nov 14 at 13:08












I somehow feel that the answer of "poke it with a knife and see what happens" might not be the answer you're looking for.... though I can promise you it's got a very high accuracy
– UKMonkey
Nov 14 at 14:16






I somehow feel that the answer of "poke it with a knife and see what happens" might not be the answer you're looking for.... though I can promise you it's got a very high accuracy
– UKMonkey
Nov 14 at 14:16






3




3




@h22 I'm surprised that a shop would sell a bike with a flat tire.
– user2259438
Nov 14 at 15:36




@h22 I'm surprised that a shop would sell a bike with a flat tire.
– user2259438
Nov 14 at 15:36




4




4




@h22 So... ask the seller? Email or phone them and ask them the specific thing you want to know about the thing they're selling.
– David Richerby
Nov 14 at 15:45




@h22 So... ask the seller? Email or phone them and ask them the specific thing you want to know about the thing they're selling.
– David Richerby
Nov 14 at 15:45










3 Answers
3






active

oldest

votes

















up vote
25
down vote



accepted










While your question of identifying a tubeless tyre has been answered, I think that might not actually be what you have to worry about. A bike might come with tubeless tyres, but that doesn't mean that they're set up tubeless. The tyres might still have a tube in them, so your concern should be identifying whether there's a tube inside or not. The easiest way to do that is to look at the valve stem, because a tubeless valve will almost always be secured with a substantial lockring, whereas a tube with a presta valve might have a little silver lockring or usually nothing at all. Any wheel with a Schrader valve is almost certain to have a tube in it as tubeless Schrader setups are extremely rare. This isn't foolproof, because some people will put a big lockring on a tube and some might put a small one on a tubeless valve, but I'm confident that this will be accurate over 95% of the time.



Schrader valve:



Schrader valve



Presta valve (tube):



Presta valve (tube):



Tubeless presta valve:



Tubeless presta valve






share|improve this answer










New contributor




Carbon side up is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
Check out our Code of Conduct.














  • 1




    Very good detective work on telling whether there is a tube inside or not! I would not imagine it was possible to do it by just looking at the valve. Welcome to the site, byt the way.
    – Grigory Rechistov
    Nov 14 at 10:32












  • That last photo looks like there's no tyre on it at all, yet the valve is still there indicating it's possibly got a tube and no outer tyre.... what's going on?
    – djsmiley2k
    Nov 14 at 12:20






  • 3




    It's a tubeless tire setup without the tire. The valve is attached to the rim (where else it could go?).
    – anatolyg
    Nov 14 at 12:28








  • 1




    A Presta valve without a removable core points at a tube. With tubeless the core needs to be removed to fill in the sealant. The opposite is NOT true however.
    – Carel
    Nov 14 at 13:28






  • 3




    I've installed hundreds of tubeless tires and I've never used a special lockring. I've only ever used a normal one and just gotten it as tight as possible using my fingers. I've known people to either use a special lockring or use pliers to tighten down the ring, but if you ever need to put a tube in the tire while on a ride, you won't be able to do that if you need pliers or a tool to get the old valve out. That's why I've only ever hand-tightened them. The sealant will seal up and small gap caused by this method.
    – user2259438
    Nov 14 at 15:35


















up vote
10
down vote













Look at the tire sidewall for model/name, tubeless tires usually have TL, UST, TR or Tubeless in it; some tires don't (like Schwalbe Pro One), so google the model and see if it's tubeless or not. Keep in mind that some MTB tires can be setup tubeless regardless of what manufacturer claims, in this case you can unseat some tire bead and check if there's tube or sealant residue inside.






share|improve this answer




























    up vote
    4
    down vote













    For a tubeless setup you need three things: the right rim, the right tire, the right valve-stem. Carbon side up shows how to identify the valve stem, and the tire and rim should be marked, but you need to check all three, because having tires and rims rated for tubeless may be used with a tube (I do this all the time on riding lawn mowers because their rims suck and leak even though designed for tubeless operation.)



    However in your case there is an easy check since there is a flat tire. First look at the valve stem. If it is a presta use your fingers to loosen the stem nut (skip if it is too tight to loosen by hand), then wiggle the tire relative to the rim while watching the valve stem. if wiggling the tire moves the valve stem you have a tube if you feel the tube stretching against the valve stem, you have a tube, otherwise either you have a tubeless setup or a burst tube.






    share|improve this answer





















      Your Answer








      StackExchange.ready(function() {
      var channelOptions = {
      tags: "".split(" "),
      id: "126"
      };
      initTagRenderer("".split(" "), "".split(" "), channelOptions);

      StackExchange.using("externalEditor", function() {
      // Have to fire editor after snippets, if snippets enabled
      if (StackExchange.settings.snippets.snippetsEnabled) {
      StackExchange.using("snippets", function() {
      createEditor();
      });
      }
      else {
      createEditor();
      }
      });

      function createEditor() {
      StackExchange.prepareEditor({
      heartbeatType: 'answer',
      convertImagesToLinks: false,
      noModals: true,
      showLowRepImageUploadWarning: true,
      reputationToPostImages: null,
      bindNavPrevention: true,
      postfix: "",
      imageUploader: {
      brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
      contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
      allowUrls: true
      },
      noCode: true, onDemand: true,
      discardSelector: ".discard-answer"
      ,immediatelyShowMarkdownHelp:true
      });


      }
      });














       

      draft saved


      draft discarded


















      StackExchange.ready(
      function () {
      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f58051%2fhow-to-recognize-a-tubeless-tire%23new-answer', 'question_page');
      }
      );

      Post as a guest















      Required, but never shown

























      3 Answers
      3






      active

      oldest

      votes








      3 Answers
      3






      active

      oldest

      votes









      active

      oldest

      votes






      active

      oldest

      votes








      up vote
      25
      down vote



      accepted










      While your question of identifying a tubeless tyre has been answered, I think that might not actually be what you have to worry about. A bike might come with tubeless tyres, but that doesn't mean that they're set up tubeless. The tyres might still have a tube in them, so your concern should be identifying whether there's a tube inside or not. The easiest way to do that is to look at the valve stem, because a tubeless valve will almost always be secured with a substantial lockring, whereas a tube with a presta valve might have a little silver lockring or usually nothing at all. Any wheel with a Schrader valve is almost certain to have a tube in it as tubeless Schrader setups are extremely rare. This isn't foolproof, because some people will put a big lockring on a tube and some might put a small one on a tubeless valve, but I'm confident that this will be accurate over 95% of the time.



      Schrader valve:



      Schrader valve



      Presta valve (tube):



      Presta valve (tube):



      Tubeless presta valve:



      Tubeless presta valve






      share|improve this answer










      New contributor




      Carbon side up is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.














      • 1




        Very good detective work on telling whether there is a tube inside or not! I would not imagine it was possible to do it by just looking at the valve. Welcome to the site, byt the way.
        – Grigory Rechistov
        Nov 14 at 10:32












      • That last photo looks like there's no tyre on it at all, yet the valve is still there indicating it's possibly got a tube and no outer tyre.... what's going on?
        – djsmiley2k
        Nov 14 at 12:20






      • 3




        It's a tubeless tire setup without the tire. The valve is attached to the rim (where else it could go?).
        – anatolyg
        Nov 14 at 12:28








      • 1




        A Presta valve without a removable core points at a tube. With tubeless the core needs to be removed to fill in the sealant. The opposite is NOT true however.
        – Carel
        Nov 14 at 13:28






      • 3




        I've installed hundreds of tubeless tires and I've never used a special lockring. I've only ever used a normal one and just gotten it as tight as possible using my fingers. I've known people to either use a special lockring or use pliers to tighten down the ring, but if you ever need to put a tube in the tire while on a ride, you won't be able to do that if you need pliers or a tool to get the old valve out. That's why I've only ever hand-tightened them. The sealant will seal up and small gap caused by this method.
        – user2259438
        Nov 14 at 15:35















      up vote
      25
      down vote



      accepted










      While your question of identifying a tubeless tyre has been answered, I think that might not actually be what you have to worry about. A bike might come with tubeless tyres, but that doesn't mean that they're set up tubeless. The tyres might still have a tube in them, so your concern should be identifying whether there's a tube inside or not. The easiest way to do that is to look at the valve stem, because a tubeless valve will almost always be secured with a substantial lockring, whereas a tube with a presta valve might have a little silver lockring or usually nothing at all. Any wheel with a Schrader valve is almost certain to have a tube in it as tubeless Schrader setups are extremely rare. This isn't foolproof, because some people will put a big lockring on a tube and some might put a small one on a tubeless valve, but I'm confident that this will be accurate over 95% of the time.



      Schrader valve:



      Schrader valve



      Presta valve (tube):



      Presta valve (tube):



      Tubeless presta valve:



      Tubeless presta valve






      share|improve this answer










      New contributor




      Carbon side up is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.














      • 1




        Very good detective work on telling whether there is a tube inside or not! I would not imagine it was possible to do it by just looking at the valve. Welcome to the site, byt the way.
        – Grigory Rechistov
        Nov 14 at 10:32












      • That last photo looks like there's no tyre on it at all, yet the valve is still there indicating it's possibly got a tube and no outer tyre.... what's going on?
        – djsmiley2k
        Nov 14 at 12:20






      • 3




        It's a tubeless tire setup without the tire. The valve is attached to the rim (where else it could go?).
        – anatolyg
        Nov 14 at 12:28








      • 1




        A Presta valve without a removable core points at a tube. With tubeless the core needs to be removed to fill in the sealant. The opposite is NOT true however.
        – Carel
        Nov 14 at 13:28






      • 3




        I've installed hundreds of tubeless tires and I've never used a special lockring. I've only ever used a normal one and just gotten it as tight as possible using my fingers. I've known people to either use a special lockring or use pliers to tighten down the ring, but if you ever need to put a tube in the tire while on a ride, you won't be able to do that if you need pliers or a tool to get the old valve out. That's why I've only ever hand-tightened them. The sealant will seal up and small gap caused by this method.
        – user2259438
        Nov 14 at 15:35













      up vote
      25
      down vote



      accepted







      up vote
      25
      down vote



      accepted






      While your question of identifying a tubeless tyre has been answered, I think that might not actually be what you have to worry about. A bike might come with tubeless tyres, but that doesn't mean that they're set up tubeless. The tyres might still have a tube in them, so your concern should be identifying whether there's a tube inside or not. The easiest way to do that is to look at the valve stem, because a tubeless valve will almost always be secured with a substantial lockring, whereas a tube with a presta valve might have a little silver lockring or usually nothing at all. Any wheel with a Schrader valve is almost certain to have a tube in it as tubeless Schrader setups are extremely rare. This isn't foolproof, because some people will put a big lockring on a tube and some might put a small one on a tubeless valve, but I'm confident that this will be accurate over 95% of the time.



      Schrader valve:



      Schrader valve



      Presta valve (tube):



      Presta valve (tube):



      Tubeless presta valve:



      Tubeless presta valve






      share|improve this answer










      New contributor




      Carbon side up is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      While your question of identifying a tubeless tyre has been answered, I think that might not actually be what you have to worry about. A bike might come with tubeless tyres, but that doesn't mean that they're set up tubeless. The tyres might still have a tube in them, so your concern should be identifying whether there's a tube inside or not. The easiest way to do that is to look at the valve stem, because a tubeless valve will almost always be secured with a substantial lockring, whereas a tube with a presta valve might have a little silver lockring or usually nothing at all. Any wheel with a Schrader valve is almost certain to have a tube in it as tubeless Schrader setups are extremely rare. This isn't foolproof, because some people will put a big lockring on a tube and some might put a small one on a tubeless valve, but I'm confident that this will be accurate over 95% of the time.



      Schrader valve:



      Schrader valve



      Presta valve (tube):



      Presta valve (tube):



      Tubeless presta valve:



      Tubeless presta valve







      share|improve this answer










      New contributor




      Carbon side up is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      share|improve this answer



      share|improve this answer








      edited Nov 14 at 11:50









      Swifty

      2,128323




      2,128323






      New contributor




      Carbon side up is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.









      answered Nov 14 at 9:35









      Carbon side up

      43619




      43619




      New contributor




      Carbon side up is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.





      New contributor





      Carbon side up is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.






      Carbon side up is a new contributor to this site. Take care in asking for clarification, commenting, and answering.
      Check out our Code of Conduct.








      • 1




        Very good detective work on telling whether there is a tube inside or not! I would not imagine it was possible to do it by just looking at the valve. Welcome to the site, byt the way.
        – Grigory Rechistov
        Nov 14 at 10:32












      • That last photo looks like there's no tyre on it at all, yet the valve is still there indicating it's possibly got a tube and no outer tyre.... what's going on?
        – djsmiley2k
        Nov 14 at 12:20






      • 3




        It's a tubeless tire setup without the tire. The valve is attached to the rim (where else it could go?).
        – anatolyg
        Nov 14 at 12:28








      • 1




        A Presta valve without a removable core points at a tube. With tubeless the core needs to be removed to fill in the sealant. The opposite is NOT true however.
        – Carel
        Nov 14 at 13:28






      • 3




        I've installed hundreds of tubeless tires and I've never used a special lockring. I've only ever used a normal one and just gotten it as tight as possible using my fingers. I've known people to either use a special lockring or use pliers to tighten down the ring, but if you ever need to put a tube in the tire while on a ride, you won't be able to do that if you need pliers or a tool to get the old valve out. That's why I've only ever hand-tightened them. The sealant will seal up and small gap caused by this method.
        – user2259438
        Nov 14 at 15:35














      • 1




        Very good detective work on telling whether there is a tube inside or not! I would not imagine it was possible to do it by just looking at the valve. Welcome to the site, byt the way.
        – Grigory Rechistov
        Nov 14 at 10:32












      • That last photo looks like there's no tyre on it at all, yet the valve is still there indicating it's possibly got a tube and no outer tyre.... what's going on?
        – djsmiley2k
        Nov 14 at 12:20






      • 3




        It's a tubeless tire setup without the tire. The valve is attached to the rim (where else it could go?).
        – anatolyg
        Nov 14 at 12:28








      • 1




        A Presta valve without a removable core points at a tube. With tubeless the core needs to be removed to fill in the sealant. The opposite is NOT true however.
        – Carel
        Nov 14 at 13:28






      • 3




        I've installed hundreds of tubeless tires and I've never used a special lockring. I've only ever used a normal one and just gotten it as tight as possible using my fingers. I've known people to either use a special lockring or use pliers to tighten down the ring, but if you ever need to put a tube in the tire while on a ride, you won't be able to do that if you need pliers or a tool to get the old valve out. That's why I've only ever hand-tightened them. The sealant will seal up and small gap caused by this method.
        – user2259438
        Nov 14 at 15:35








      1




      1




      Very good detective work on telling whether there is a tube inside or not! I would not imagine it was possible to do it by just looking at the valve. Welcome to the site, byt the way.
      – Grigory Rechistov
      Nov 14 at 10:32






      Very good detective work on telling whether there is a tube inside or not! I would not imagine it was possible to do it by just looking at the valve. Welcome to the site, byt the way.
      – Grigory Rechistov
      Nov 14 at 10:32














      That last photo looks like there's no tyre on it at all, yet the valve is still there indicating it's possibly got a tube and no outer tyre.... what's going on?
      – djsmiley2k
      Nov 14 at 12:20




      That last photo looks like there's no tyre on it at all, yet the valve is still there indicating it's possibly got a tube and no outer tyre.... what's going on?
      – djsmiley2k
      Nov 14 at 12:20




      3




      3




      It's a tubeless tire setup without the tire. The valve is attached to the rim (where else it could go?).
      – anatolyg
      Nov 14 at 12:28






      It's a tubeless tire setup without the tire. The valve is attached to the rim (where else it could go?).
      – anatolyg
      Nov 14 at 12:28






      1




      1




      A Presta valve without a removable core points at a tube. With tubeless the core needs to be removed to fill in the sealant. The opposite is NOT true however.
      – Carel
      Nov 14 at 13:28




      A Presta valve without a removable core points at a tube. With tubeless the core needs to be removed to fill in the sealant. The opposite is NOT true however.
      – Carel
      Nov 14 at 13:28




      3




      3




      I've installed hundreds of tubeless tires and I've never used a special lockring. I've only ever used a normal one and just gotten it as tight as possible using my fingers. I've known people to either use a special lockring or use pliers to tighten down the ring, but if you ever need to put a tube in the tire while on a ride, you won't be able to do that if you need pliers or a tool to get the old valve out. That's why I've only ever hand-tightened them. The sealant will seal up and small gap caused by this method.
      – user2259438
      Nov 14 at 15:35




      I've installed hundreds of tubeless tires and I've never used a special lockring. I've only ever used a normal one and just gotten it as tight as possible using my fingers. I've known people to either use a special lockring or use pliers to tighten down the ring, but if you ever need to put a tube in the tire while on a ride, you won't be able to do that if you need pliers or a tool to get the old valve out. That's why I've only ever hand-tightened them. The sealant will seal up and small gap caused by this method.
      – user2259438
      Nov 14 at 15:35










      up vote
      10
      down vote













      Look at the tire sidewall for model/name, tubeless tires usually have TL, UST, TR or Tubeless in it; some tires don't (like Schwalbe Pro One), so google the model and see if it's tubeless or not. Keep in mind that some MTB tires can be setup tubeless regardless of what manufacturer claims, in this case you can unseat some tire bead and check if there's tube or sealant residue inside.






      share|improve this answer

























        up vote
        10
        down vote













        Look at the tire sidewall for model/name, tubeless tires usually have TL, UST, TR or Tubeless in it; some tires don't (like Schwalbe Pro One), so google the model and see if it's tubeless or not. Keep in mind that some MTB tires can be setup tubeless regardless of what manufacturer claims, in this case you can unseat some tire bead and check if there's tube or sealant residue inside.






        share|improve this answer























          up vote
          10
          down vote










          up vote
          10
          down vote









          Look at the tire sidewall for model/name, tubeless tires usually have TL, UST, TR or Tubeless in it; some tires don't (like Schwalbe Pro One), so google the model and see if it's tubeless or not. Keep in mind that some MTB tires can be setup tubeless regardless of what manufacturer claims, in this case you can unseat some tire bead and check if there's tube or sealant residue inside.






          share|improve this answer












          Look at the tire sidewall for model/name, tubeless tires usually have TL, UST, TR or Tubeless in it; some tires don't (like Schwalbe Pro One), so google the model and see if it's tubeless or not. Keep in mind that some MTB tires can be setup tubeless regardless of what manufacturer claims, in this case you can unseat some tire bead and check if there's tube or sealant residue inside.







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered Nov 14 at 8:59









          Klaster_1

          3,59711332




          3,59711332






















              up vote
              4
              down vote













              For a tubeless setup you need three things: the right rim, the right tire, the right valve-stem. Carbon side up shows how to identify the valve stem, and the tire and rim should be marked, but you need to check all three, because having tires and rims rated for tubeless may be used with a tube (I do this all the time on riding lawn mowers because their rims suck and leak even though designed for tubeless operation.)



              However in your case there is an easy check since there is a flat tire. First look at the valve stem. If it is a presta use your fingers to loosen the stem nut (skip if it is too tight to loosen by hand), then wiggle the tire relative to the rim while watching the valve stem. if wiggling the tire moves the valve stem you have a tube if you feel the tube stretching against the valve stem, you have a tube, otherwise either you have a tubeless setup or a burst tube.






              share|improve this answer

























                up vote
                4
                down vote













                For a tubeless setup you need three things: the right rim, the right tire, the right valve-stem. Carbon side up shows how to identify the valve stem, and the tire and rim should be marked, but you need to check all three, because having tires and rims rated for tubeless may be used with a tube (I do this all the time on riding lawn mowers because their rims suck and leak even though designed for tubeless operation.)



                However in your case there is an easy check since there is a flat tire. First look at the valve stem. If it is a presta use your fingers to loosen the stem nut (skip if it is too tight to loosen by hand), then wiggle the tire relative to the rim while watching the valve stem. if wiggling the tire moves the valve stem you have a tube if you feel the tube stretching against the valve stem, you have a tube, otherwise either you have a tubeless setup or a burst tube.






                share|improve this answer























                  up vote
                  4
                  down vote










                  up vote
                  4
                  down vote









                  For a tubeless setup you need three things: the right rim, the right tire, the right valve-stem. Carbon side up shows how to identify the valve stem, and the tire and rim should be marked, but you need to check all three, because having tires and rims rated for tubeless may be used with a tube (I do this all the time on riding lawn mowers because their rims suck and leak even though designed for tubeless operation.)



                  However in your case there is an easy check since there is a flat tire. First look at the valve stem. If it is a presta use your fingers to loosen the stem nut (skip if it is too tight to loosen by hand), then wiggle the tire relative to the rim while watching the valve stem. if wiggling the tire moves the valve stem you have a tube if you feel the tube stretching against the valve stem, you have a tube, otherwise either you have a tubeless setup or a burst tube.






                  share|improve this answer












                  For a tubeless setup you need three things: the right rim, the right tire, the right valve-stem. Carbon side up shows how to identify the valve stem, and the tire and rim should be marked, but you need to check all three, because having tires and rims rated for tubeless may be used with a tube (I do this all the time on riding lawn mowers because their rims suck and leak even though designed for tubeless operation.)



                  However in your case there is an easy check since there is a flat tire. First look at the valve stem. If it is a presta use your fingers to loosen the stem nut (skip if it is too tight to loosen by hand), then wiggle the tire relative to the rim while watching the valve stem. if wiggling the tire moves the valve stem you have a tube if you feel the tube stretching against the valve stem, you have a tube, otherwise either you have a tubeless setup or a burst tube.







                  share|improve this answer












                  share|improve this answer



                  share|improve this answer










                  answered Nov 15 at 0:42









                  hildred

                  3021211




                  3021211






























                       

                      draft saved


                      draft discarded



















































                       


                      draft saved


                      draft discarded














                      StackExchange.ready(
                      function () {
                      StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fbicycles.stackexchange.com%2fquestions%2f58051%2fhow-to-recognize-a-tubeless-tire%23new-answer', 'question_page');
                      }
                      );

                      Post as a guest















                      Required, but never shown





















































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown

































                      Required, but never shown














                      Required, but never shown












                      Required, but never shown







                      Required, but never shown







                      Popular posts from this blog

                      Актюбинская область

                      QoS: MAC-Priority for clients behind a repeater

                      AnyDesk - Fatal Program Failure