Unable to create Windows 10 usb boot stick with fedora












0














I tried many different ways of creating a 64bit Windows 10 Boot Image with a USB drive using my laptop with Fedora 28. However, everything I tried failed.



Using either GNOME MultiWriter or dd left me with no option to boot from the usb device in UEFI.



mkusb, woeusb or UNetbootin all left me with the ability to select the USB boot option in UEFI, enter the installation manager of Windows, but after choosing the language and starting the setup, it loads and fails with an error saying it could not find C:sourcesinstall.wim. I double- and triple-checked that it is there, but for some reason, Windows cannot find it. Thus, this answer on the Microsoft forums does not help, either. This also happens when I manually partition the stick as described in this answer.



I also tried using Rufus with Wine, but it does not detect the USB drive.



My USB drive has 32 GB and is a USB 3.0 drive. I used it before to install Fedora on the very same laptop. I also tried using a USB 2.0 drive (also used to install other OSes in the past) just in case, but to no avail; the same error message about install.wim occurred.



I also downloaded the Windows 10 image again, in case of any corruption and verified the md5 sum to be exactly the same between both donwloads.



I don't know what else to do. Does anybody know about this error with install.wim? I was unable to find any additional information about this error. When I look at the file inside Nautilus on the drive, I'm a bit surprised to find it being 4.3 GB in size. The stick being formatted as FAT32, I thought there couldn't be any files greater in size than 4 GB.










share|improve this question



























    0














    I tried many different ways of creating a 64bit Windows 10 Boot Image with a USB drive using my laptop with Fedora 28. However, everything I tried failed.



    Using either GNOME MultiWriter or dd left me with no option to boot from the usb device in UEFI.



    mkusb, woeusb or UNetbootin all left me with the ability to select the USB boot option in UEFI, enter the installation manager of Windows, but after choosing the language and starting the setup, it loads and fails with an error saying it could not find C:sourcesinstall.wim. I double- and triple-checked that it is there, but for some reason, Windows cannot find it. Thus, this answer on the Microsoft forums does not help, either. This also happens when I manually partition the stick as described in this answer.



    I also tried using Rufus with Wine, but it does not detect the USB drive.



    My USB drive has 32 GB and is a USB 3.0 drive. I used it before to install Fedora on the very same laptop. I also tried using a USB 2.0 drive (also used to install other OSes in the past) just in case, but to no avail; the same error message about install.wim occurred.



    I also downloaded the Windows 10 image again, in case of any corruption and verified the md5 sum to be exactly the same between both donwloads.



    I don't know what else to do. Does anybody know about this error with install.wim? I was unable to find any additional information about this error. When I look at the file inside Nautilus on the drive, I'm a bit surprised to find it being 4.3 GB in size. The stick being formatted as FAT32, I thought there couldn't be any files greater in size than 4 GB.










    share|improve this question

























      0












      0








      0







      I tried many different ways of creating a 64bit Windows 10 Boot Image with a USB drive using my laptop with Fedora 28. However, everything I tried failed.



      Using either GNOME MultiWriter or dd left me with no option to boot from the usb device in UEFI.



      mkusb, woeusb or UNetbootin all left me with the ability to select the USB boot option in UEFI, enter the installation manager of Windows, but after choosing the language and starting the setup, it loads and fails with an error saying it could not find C:sourcesinstall.wim. I double- and triple-checked that it is there, but for some reason, Windows cannot find it. Thus, this answer on the Microsoft forums does not help, either. This also happens when I manually partition the stick as described in this answer.



      I also tried using Rufus with Wine, but it does not detect the USB drive.



      My USB drive has 32 GB and is a USB 3.0 drive. I used it before to install Fedora on the very same laptop. I also tried using a USB 2.0 drive (also used to install other OSes in the past) just in case, but to no avail; the same error message about install.wim occurred.



      I also downloaded the Windows 10 image again, in case of any corruption and verified the md5 sum to be exactly the same between both donwloads.



      I don't know what else to do. Does anybody know about this error with install.wim? I was unable to find any additional information about this error. When I look at the file inside Nautilus on the drive, I'm a bit surprised to find it being 4.3 GB in size. The stick being formatted as FAT32, I thought there couldn't be any files greater in size than 4 GB.










      share|improve this question













      I tried many different ways of creating a 64bit Windows 10 Boot Image with a USB drive using my laptop with Fedora 28. However, everything I tried failed.



      Using either GNOME MultiWriter or dd left me with no option to boot from the usb device in UEFI.



      mkusb, woeusb or UNetbootin all left me with the ability to select the USB boot option in UEFI, enter the installation manager of Windows, but after choosing the language and starting the setup, it loads and fails with an error saying it could not find C:sourcesinstall.wim. I double- and triple-checked that it is there, but for some reason, Windows cannot find it. Thus, this answer on the Microsoft forums does not help, either. This also happens when I manually partition the stick as described in this answer.



      I also tried using Rufus with Wine, but it does not detect the USB drive.



      My USB drive has 32 GB and is a USB 3.0 drive. I used it before to install Fedora on the very same laptop. I also tried using a USB 2.0 drive (also used to install other OSes in the past) just in case, but to no avail; the same error message about install.wim occurred.



      I also downloaded the Windows 10 image again, in case of any corruption and verified the md5 sum to be exactly the same between both donwloads.



      I don't know what else to do. Does anybody know about this error with install.wim? I was unable to find any additional information about this error. When I look at the file inside Nautilus on the drive, I'm a bit surprised to find it being 4.3 GB in size. The stick being formatted as FAT32, I thought there couldn't be any files greater in size than 4 GB.







      linux windows-10 boot usb






      share|improve this question













      share|improve this question











      share|improve this question




      share|improve this question










      asked Nov 22 at 20:25









      Zollern

      184




      184






















          1 Answer
          1






          active

          oldest

          votes


















          0














          did u format ur USB to FAT 32 firsts
          u can fomat via app DISKS .. then right click gear tol format to select FAT
          note:..u should format olnly one whole partition



          to do this open gpartitioln and selct right click USB AFTER DEVICES... UCAN DELETE PARTIONS to single partition folr folrmatting/.... or right click thhe device... press unmollunt>>> then format to FAT32



          also try woesUSB or multiwriter... ireccomend multiwriter in the software app



          then i reccomend boot mode check tol see which olne works/// shoul;d be legacy///UIE boolt mades..



          be sure to xheck this method






          share|improve this answer





















          • nolte;;; check the checkmark in gpartition and selct apply to actually apply the settings every time in the popup screen after sel;ecting the checkmark
            – wiseyoda707
            Nov 24 at 15:29













          Your Answer








          StackExchange.ready(function() {
          var channelOptions = {
          tags: "".split(" "),
          id: "3"
          };
          initTagRenderer("".split(" "), "".split(" "), channelOptions);

          StackExchange.using("externalEditor", function() {
          // Have to fire editor after snippets, if snippets enabled
          if (StackExchange.settings.snippets.snippetsEnabled) {
          StackExchange.using("snippets", function() {
          createEditor();
          });
          }
          else {
          createEditor();
          }
          });

          function createEditor() {
          StackExchange.prepareEditor({
          heartbeatType: 'answer',
          autoActivateHeartbeat: false,
          convertImagesToLinks: true,
          noModals: true,
          showLowRepImageUploadWarning: true,
          reputationToPostImages: 10,
          bindNavPrevention: true,
          postfix: "",
          imageUploader: {
          brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
          contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
          allowUrls: true
          },
          onDemand: true,
          discardSelector: ".discard-answer"
          ,immediatelyShowMarkdownHelp:true
          });


          }
          });














          draft saved

          draft discarded


















          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1377677%2funable-to-create-windows-10-usb-boot-stick-with-fedora%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown

























          1 Answer
          1






          active

          oldest

          votes








          1 Answer
          1






          active

          oldest

          votes









          active

          oldest

          votes






          active

          oldest

          votes









          0














          did u format ur USB to FAT 32 firsts
          u can fomat via app DISKS .. then right click gear tol format to select FAT
          note:..u should format olnly one whole partition



          to do this open gpartitioln and selct right click USB AFTER DEVICES... UCAN DELETE PARTIONS to single partition folr folrmatting/.... or right click thhe device... press unmollunt>>> then format to FAT32



          also try woesUSB or multiwriter... ireccomend multiwriter in the software app



          then i reccomend boot mode check tol see which olne works/// shoul;d be legacy///UIE boolt mades..



          be sure to xheck this method






          share|improve this answer





















          • nolte;;; check the checkmark in gpartition and selct apply to actually apply the settings every time in the popup screen after sel;ecting the checkmark
            – wiseyoda707
            Nov 24 at 15:29


















          0














          did u format ur USB to FAT 32 firsts
          u can fomat via app DISKS .. then right click gear tol format to select FAT
          note:..u should format olnly one whole partition



          to do this open gpartitioln and selct right click USB AFTER DEVICES... UCAN DELETE PARTIONS to single partition folr folrmatting/.... or right click thhe device... press unmollunt>>> then format to FAT32



          also try woesUSB or multiwriter... ireccomend multiwriter in the software app



          then i reccomend boot mode check tol see which olne works/// shoul;d be legacy///UIE boolt mades..



          be sure to xheck this method






          share|improve this answer





















          • nolte;;; check the checkmark in gpartition and selct apply to actually apply the settings every time in the popup screen after sel;ecting the checkmark
            – wiseyoda707
            Nov 24 at 15:29
















          0












          0








          0






          did u format ur USB to FAT 32 firsts
          u can fomat via app DISKS .. then right click gear tol format to select FAT
          note:..u should format olnly one whole partition



          to do this open gpartitioln and selct right click USB AFTER DEVICES... UCAN DELETE PARTIONS to single partition folr folrmatting/.... or right click thhe device... press unmollunt>>> then format to FAT32



          also try woesUSB or multiwriter... ireccomend multiwriter in the software app



          then i reccomend boot mode check tol see which olne works/// shoul;d be legacy///UIE boolt mades..



          be sure to xheck this method






          share|improve this answer












          did u format ur USB to FAT 32 firsts
          u can fomat via app DISKS .. then right click gear tol format to select FAT
          note:..u should format olnly one whole partition



          to do this open gpartitioln and selct right click USB AFTER DEVICES... UCAN DELETE PARTIONS to single partition folr folrmatting/.... or right click thhe device... press unmollunt>>> then format to FAT32



          also try woesUSB or multiwriter... ireccomend multiwriter in the software app



          then i reccomend boot mode check tol see which olne works/// shoul;d be legacy///UIE boolt mades..



          be sure to xheck this method







          share|improve this answer












          share|improve this answer



          share|improve this answer










          answered Nov 24 at 15:27









          wiseyoda707

          1




          1












          • nolte;;; check the checkmark in gpartition and selct apply to actually apply the settings every time in the popup screen after sel;ecting the checkmark
            – wiseyoda707
            Nov 24 at 15:29




















          • nolte;;; check the checkmark in gpartition and selct apply to actually apply the settings every time in the popup screen after sel;ecting the checkmark
            – wiseyoda707
            Nov 24 at 15:29


















          nolte;;; check the checkmark in gpartition and selct apply to actually apply the settings every time in the popup screen after sel;ecting the checkmark
          – wiseyoda707
          Nov 24 at 15:29






          nolte;;; check the checkmark in gpartition and selct apply to actually apply the settings every time in the popup screen after sel;ecting the checkmark
          – wiseyoda707
          Nov 24 at 15:29




















          draft saved

          draft discarded




















































          Thanks for contributing an answer to Super User!


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.





          Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


          Please pay close attention to the following guidance:


          • Please be sure to answer the question. Provide details and share your research!

          But avoid



          • Asking for help, clarification, or responding to other answers.

          • Making statements based on opinion; back them up with references or personal experience.


          To learn more, see our tips on writing great answers.




          draft saved


          draft discarded














          StackExchange.ready(
          function () {
          StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f1377677%2funable-to-create-windows-10-usb-boot-stick-with-fedora%23new-answer', 'question_page');
          }
          );

          Post as a guest















          Required, but never shown





















































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown

































          Required, but never shown














          Required, but never shown












          Required, but never shown







          Required, but never shown







          Popular posts from this blog

          AnyDesk - Fatal Program Failure

          How to calibrate 16:9 built-in touch-screen to a 4:3 resolution?

          QoS: MAC-Priority for clients behind a repeater