TikZ: Coordinate on shape vertices
up vote
4
down vote
favorite
I know that I can draw a rectangle with tikz using draw (0.0,0.0) rectangle (1.0,1.0);
. Is there a possibility to determine all 4 edge coordinates directly from the shape?
I do can save the lower left coordinate and the upper right by draw (0.0,0.0) coordinate (lb) rectangle (1.0,1.0) coordinate (ru);
. But is there a way to get the upper left and bottom right corner directly from the shape?
I know I can calculate them. But are they directly accessible from the shape?
MWE
documentclass{standalone}
usepackage{tikz}
usetikzlibrary{calc}
begin{document}
begin{tikzpicture}
% the rectangle
draw (0.0,0.0) coordinate (lb) rectangle (1.0,1.0) coordinate (ru);
% coordinates
draw (lb) circle [radius=2pt];
draw (ru) circle [radius=2pt];
% calculated coordinates
draw[dashed] (lb |- ru) coordinate (lu) circle [radius=2pt];
draw[dashed] (lb -| ru) coordinate (rb) circle [radius=2pt];
end{tikzpicture}
end{document}
tikz-pgf coordinates tikz-shape
add a comment |
up vote
4
down vote
favorite
I know that I can draw a rectangle with tikz using draw (0.0,0.0) rectangle (1.0,1.0);
. Is there a possibility to determine all 4 edge coordinates directly from the shape?
I do can save the lower left coordinate and the upper right by draw (0.0,0.0) coordinate (lb) rectangle (1.0,1.0) coordinate (ru);
. But is there a way to get the upper left and bottom right corner directly from the shape?
I know I can calculate them. But are they directly accessible from the shape?
MWE
documentclass{standalone}
usepackage{tikz}
usetikzlibrary{calc}
begin{document}
begin{tikzpicture}
% the rectangle
draw (0.0,0.0) coordinate (lb) rectangle (1.0,1.0) coordinate (ru);
% coordinates
draw (lb) circle [radius=2pt];
draw (ru) circle [radius=2pt];
% calculated coordinates
draw[dashed] (lb |- ru) coordinate (lu) circle [radius=2pt];
draw[dashed] (lb -| ru) coordinate (rb) circle [radius=2pt];
end{tikzpicture}
end{document}
tikz-pgf coordinates tikz-shape
add a comment |
up vote
4
down vote
favorite
up vote
4
down vote
favorite
I know that I can draw a rectangle with tikz using draw (0.0,0.0) rectangle (1.0,1.0);
. Is there a possibility to determine all 4 edge coordinates directly from the shape?
I do can save the lower left coordinate and the upper right by draw (0.0,0.0) coordinate (lb) rectangle (1.0,1.0) coordinate (ru);
. But is there a way to get the upper left and bottom right corner directly from the shape?
I know I can calculate them. But are they directly accessible from the shape?
MWE
documentclass{standalone}
usepackage{tikz}
usetikzlibrary{calc}
begin{document}
begin{tikzpicture}
% the rectangle
draw (0.0,0.0) coordinate (lb) rectangle (1.0,1.0) coordinate (ru);
% coordinates
draw (lb) circle [radius=2pt];
draw (ru) circle [radius=2pt];
% calculated coordinates
draw[dashed] (lb |- ru) coordinate (lu) circle [radius=2pt];
draw[dashed] (lb -| ru) coordinate (rb) circle [radius=2pt];
end{tikzpicture}
end{document}
tikz-pgf coordinates tikz-shape
I know that I can draw a rectangle with tikz using draw (0.0,0.0) rectangle (1.0,1.0);
. Is there a possibility to determine all 4 edge coordinates directly from the shape?
I do can save the lower left coordinate and the upper right by draw (0.0,0.0) coordinate (lb) rectangle (1.0,1.0) coordinate (ru);
. But is there a way to get the upper left and bottom right corner directly from the shape?
I know I can calculate them. But are they directly accessible from the shape?
MWE
documentclass{standalone}
usepackage{tikz}
usetikzlibrary{calc}
begin{document}
begin{tikzpicture}
% the rectangle
draw (0.0,0.0) coordinate (lb) rectangle (1.0,1.0) coordinate (ru);
% coordinates
draw (lb) circle [radius=2pt];
draw (ru) circle [radius=2pt];
% calculated coordinates
draw[dashed] (lb |- ru) coordinate (lu) circle [radius=2pt];
draw[dashed] (lb -| ru) coordinate (rb) circle [radius=2pt];
end{tikzpicture}
end{document}
tikz-pgf coordinates tikz-shape
tikz-pgf coordinates tikz-shape
asked Nov 26 at 14:47
krtek
873820
873820
add a comment |
add a comment |
2 Answers
2
active
oldest
votes
up vote
3
down vote
accepted
You could define your own rectangle path. In the MWE
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}[my rectangle/.style={to path={
-| coordinate[pos=0.5] (#1-2) (tikztotarget) coordinate (#1-3)
-| coordinate (#1-4) (tikztostart) coordinate (#1-1) }}]
draw (0,0) edge[my rectangle=krtek] (1,1);
foreach X in {1,...,4}
{draw (krtek-X) circle [radius=2pt];}
end{tikzpicture}
end{document}
the style my rectangle=<coordinate base name>
will give the four corners the names coordinate base name-1
, ... , coordinate base name-4
.
And there are, of course, predefined shapes that have the corner coordinates stored in anchors.
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
usetikzlibrary{shapes.geometric}
begin{tikzpicture}
% the rectangle
path (0,0) node[draw,anchor=south west,minimum size=1cm] (R) {};
foreach X in {45,135,225,315}
{draw (R.X) circle [radius=2pt];}
path (2,0) node[draw,anchor=south west,minimum size={sqrt(2)*1cm},regular polygon,regular
polygon sides=4] (poly) {};
foreach X in {1,...,4}
{draw (poly.corner X) circle [radius=2pt];}
end{tikzpicture}
end{document}
add a comment |
up vote
2
down vote
If you don't want to explicitely declare coordinates for the corners, you can automatically convert your rectangle into a node
with fit
library. This way, the resultant node gives you all rectangular anchors without havint to name them.
Following example shows how to insert rectangular coordinates into fit
parameter. The result node is equivalent to previously drawn rectangle (you don't need to draw the previous rectangle, it's just for demonstration purposes).
documentclass[tikz,border=2mm]{standalone}
usetikzlibrary{fit}
begin{document}
begin{tikzpicture}
draw (0,0) rectangle (2,1);
node[fit={(0,0) (2,1)}, inner sep=0pt, draw=red, opacity=.5] (a) {};
foreach i in {north east, north west, south east, south west}
draw (a.i) circle(2pt);
end{tikzpicture}
end{document}
add a comment |
2 Answers
2
active
oldest
votes
2 Answers
2
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
3
down vote
accepted
You could define your own rectangle path. In the MWE
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}[my rectangle/.style={to path={
-| coordinate[pos=0.5] (#1-2) (tikztotarget) coordinate (#1-3)
-| coordinate (#1-4) (tikztostart) coordinate (#1-1) }}]
draw (0,0) edge[my rectangle=krtek] (1,1);
foreach X in {1,...,4}
{draw (krtek-X) circle [radius=2pt];}
end{tikzpicture}
end{document}
the style my rectangle=<coordinate base name>
will give the four corners the names coordinate base name-1
, ... , coordinate base name-4
.
And there are, of course, predefined shapes that have the corner coordinates stored in anchors.
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
usetikzlibrary{shapes.geometric}
begin{tikzpicture}
% the rectangle
path (0,0) node[draw,anchor=south west,minimum size=1cm] (R) {};
foreach X in {45,135,225,315}
{draw (R.X) circle [radius=2pt];}
path (2,0) node[draw,anchor=south west,minimum size={sqrt(2)*1cm},regular polygon,regular
polygon sides=4] (poly) {};
foreach X in {1,...,4}
{draw (poly.corner X) circle [radius=2pt];}
end{tikzpicture}
end{document}
add a comment |
up vote
3
down vote
accepted
You could define your own rectangle path. In the MWE
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}[my rectangle/.style={to path={
-| coordinate[pos=0.5] (#1-2) (tikztotarget) coordinate (#1-3)
-| coordinate (#1-4) (tikztostart) coordinate (#1-1) }}]
draw (0,0) edge[my rectangle=krtek] (1,1);
foreach X in {1,...,4}
{draw (krtek-X) circle [radius=2pt];}
end{tikzpicture}
end{document}
the style my rectangle=<coordinate base name>
will give the four corners the names coordinate base name-1
, ... , coordinate base name-4
.
And there are, of course, predefined shapes that have the corner coordinates stored in anchors.
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
usetikzlibrary{shapes.geometric}
begin{tikzpicture}
% the rectangle
path (0,0) node[draw,anchor=south west,minimum size=1cm] (R) {};
foreach X in {45,135,225,315}
{draw (R.X) circle [radius=2pt];}
path (2,0) node[draw,anchor=south west,minimum size={sqrt(2)*1cm},regular polygon,regular
polygon sides=4] (poly) {};
foreach X in {1,...,4}
{draw (poly.corner X) circle [radius=2pt];}
end{tikzpicture}
end{document}
add a comment |
up vote
3
down vote
accepted
up vote
3
down vote
accepted
You could define your own rectangle path. In the MWE
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}[my rectangle/.style={to path={
-| coordinate[pos=0.5] (#1-2) (tikztotarget) coordinate (#1-3)
-| coordinate (#1-4) (tikztostart) coordinate (#1-1) }}]
draw (0,0) edge[my rectangle=krtek] (1,1);
foreach X in {1,...,4}
{draw (krtek-X) circle [radius=2pt];}
end{tikzpicture}
end{document}
the style my rectangle=<coordinate base name>
will give the four corners the names coordinate base name-1
, ... , coordinate base name-4
.
And there are, of course, predefined shapes that have the corner coordinates stored in anchors.
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
usetikzlibrary{shapes.geometric}
begin{tikzpicture}
% the rectangle
path (0,0) node[draw,anchor=south west,minimum size=1cm] (R) {};
foreach X in {45,135,225,315}
{draw (R.X) circle [radius=2pt];}
path (2,0) node[draw,anchor=south west,minimum size={sqrt(2)*1cm},regular polygon,regular
polygon sides=4] (poly) {};
foreach X in {1,...,4}
{draw (poly.corner X) circle [radius=2pt];}
end{tikzpicture}
end{document}
You could define your own rectangle path. In the MWE
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
begin{tikzpicture}[my rectangle/.style={to path={
-| coordinate[pos=0.5] (#1-2) (tikztotarget) coordinate (#1-3)
-| coordinate (#1-4) (tikztostart) coordinate (#1-1) }}]
draw (0,0) edge[my rectangle=krtek] (1,1);
foreach X in {1,...,4}
{draw (krtek-X) circle [radius=2pt];}
end{tikzpicture}
end{document}
the style my rectangle=<coordinate base name>
will give the four corners the names coordinate base name-1
, ... , coordinate base name-4
.
And there are, of course, predefined shapes that have the corner coordinates stored in anchors.
documentclass[tikz,border=3.14mm]{standalone}
begin{document}
usetikzlibrary{shapes.geometric}
begin{tikzpicture}
% the rectangle
path (0,0) node[draw,anchor=south west,minimum size=1cm] (R) {};
foreach X in {45,135,225,315}
{draw (R.X) circle [radius=2pt];}
path (2,0) node[draw,anchor=south west,minimum size={sqrt(2)*1cm},regular polygon,regular
polygon sides=4] (poly) {};
foreach X in {1,...,4}
{draw (poly.corner X) circle [radius=2pt];}
end{tikzpicture}
end{document}
edited Nov 26 at 16:13
answered Nov 26 at 15:41
marmot
79.5k489168
79.5k489168
add a comment |
add a comment |
up vote
2
down vote
If you don't want to explicitely declare coordinates for the corners, you can automatically convert your rectangle into a node
with fit
library. This way, the resultant node gives you all rectangular anchors without havint to name them.
Following example shows how to insert rectangular coordinates into fit
parameter. The result node is equivalent to previously drawn rectangle (you don't need to draw the previous rectangle, it's just for demonstration purposes).
documentclass[tikz,border=2mm]{standalone}
usetikzlibrary{fit}
begin{document}
begin{tikzpicture}
draw (0,0) rectangle (2,1);
node[fit={(0,0) (2,1)}, inner sep=0pt, draw=red, opacity=.5] (a) {};
foreach i in {north east, north west, south east, south west}
draw (a.i) circle(2pt);
end{tikzpicture}
end{document}
add a comment |
up vote
2
down vote
If you don't want to explicitely declare coordinates for the corners, you can automatically convert your rectangle into a node
with fit
library. This way, the resultant node gives you all rectangular anchors without havint to name them.
Following example shows how to insert rectangular coordinates into fit
parameter. The result node is equivalent to previously drawn rectangle (you don't need to draw the previous rectangle, it's just for demonstration purposes).
documentclass[tikz,border=2mm]{standalone}
usetikzlibrary{fit}
begin{document}
begin{tikzpicture}
draw (0,0) rectangle (2,1);
node[fit={(0,0) (2,1)}, inner sep=0pt, draw=red, opacity=.5] (a) {};
foreach i in {north east, north west, south east, south west}
draw (a.i) circle(2pt);
end{tikzpicture}
end{document}
add a comment |
up vote
2
down vote
up vote
2
down vote
If you don't want to explicitely declare coordinates for the corners, you can automatically convert your rectangle into a node
with fit
library. This way, the resultant node gives you all rectangular anchors without havint to name them.
Following example shows how to insert rectangular coordinates into fit
parameter. The result node is equivalent to previously drawn rectangle (you don't need to draw the previous rectangle, it's just for demonstration purposes).
documentclass[tikz,border=2mm]{standalone}
usetikzlibrary{fit}
begin{document}
begin{tikzpicture}
draw (0,0) rectangle (2,1);
node[fit={(0,0) (2,1)}, inner sep=0pt, draw=red, opacity=.5] (a) {};
foreach i in {north east, north west, south east, south west}
draw (a.i) circle(2pt);
end{tikzpicture}
end{document}
If you don't want to explicitely declare coordinates for the corners, you can automatically convert your rectangle into a node
with fit
library. This way, the resultant node gives you all rectangular anchors without havint to name them.
Following example shows how to insert rectangular coordinates into fit
parameter. The result node is equivalent to previously drawn rectangle (you don't need to draw the previous rectangle, it's just for demonstration purposes).
documentclass[tikz,border=2mm]{standalone}
usetikzlibrary{fit}
begin{document}
begin{tikzpicture}
draw (0,0) rectangle (2,1);
node[fit={(0,0) (2,1)}, inner sep=0pt, draw=red, opacity=.5] (a) {};
foreach i in {north east, north west, south east, south west}
draw (a.i) circle(2pt);
end{tikzpicture}
end{document}
answered Nov 26 at 16:39
Ignasi
90.5k4163302
90.5k4163302
add a comment |
add a comment |
Thanks for contributing an answer to TeX - LaTeX Stack Exchange!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2ftex.stackexchange.com%2fquestions%2f461830%2ftikz-coordinate-on-shape-vertices%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown