Why is so much of InSight visible in this image?











up vote
9
down vote

favorite












It seems really strange to me that there is so little visible of the surface in this image, it mostly appears to be the deck of InSight. Why is so little visible?



enter image description here










share|improve this question


















  • 13




    It's just a selfie.
    – Eric Duminil
    Nov 28 at 20:31






  • 4




    There is very little of the surface visible because the robot is in the way. Not sure what else there is to say! If you want to take a picture of the surface you will have to point the camera in a different direction... Maybe you want to rephrase your question, i.e. what exactly do you consider strange?
    – user2705196
    Nov 28 at 22:43






  • 9




    Why is so much InSight in sight?!
    – Joshua Ronis
    Nov 29 at 2:09










  • @user2705196 I guess the OP is wondering why the decision was made to (a) have a camera facing this way, and (b) why use this camera for introductory photography. Personally I think the answer to both is fairly obvious but that doesn't mean it can't be given :)
    – Lightness Races in Orbit
    Nov 29 at 10:36















up vote
9
down vote

favorite












It seems really strange to me that there is so little visible of the surface in this image, it mostly appears to be the deck of InSight. Why is so little visible?



enter image description here










share|improve this question


















  • 13




    It's just a selfie.
    – Eric Duminil
    Nov 28 at 20:31






  • 4




    There is very little of the surface visible because the robot is in the way. Not sure what else there is to say! If you want to take a picture of the surface you will have to point the camera in a different direction... Maybe you want to rephrase your question, i.e. what exactly do you consider strange?
    – user2705196
    Nov 28 at 22:43






  • 9




    Why is so much InSight in sight?!
    – Joshua Ronis
    Nov 29 at 2:09










  • @user2705196 I guess the OP is wondering why the decision was made to (a) have a camera facing this way, and (b) why use this camera for introductory photography. Personally I think the answer to both is fairly obvious but that doesn't mean it can't be given :)
    – Lightness Races in Orbit
    Nov 29 at 10:36













up vote
9
down vote

favorite









up vote
9
down vote

favorite











It seems really strange to me that there is so little visible of the surface in this image, it mostly appears to be the deck of InSight. Why is so little visible?



enter image description here










share|improve this question













It seems really strange to me that there is so little visible of the surface in this image, it mostly appears to be the deck of InSight. Why is so little visible?



enter image description here







mars photography insight






share|improve this question













share|improve this question











share|improve this question




share|improve this question










asked Nov 28 at 15:54









PearsonArtPhoto

78.9k16223433




78.9k16223433








  • 13




    It's just a selfie.
    – Eric Duminil
    Nov 28 at 20:31






  • 4




    There is very little of the surface visible because the robot is in the way. Not sure what else there is to say! If you want to take a picture of the surface you will have to point the camera in a different direction... Maybe you want to rephrase your question, i.e. what exactly do you consider strange?
    – user2705196
    Nov 28 at 22:43






  • 9




    Why is so much InSight in sight?!
    – Joshua Ronis
    Nov 29 at 2:09










  • @user2705196 I guess the OP is wondering why the decision was made to (a) have a camera facing this way, and (b) why use this camera for introductory photography. Personally I think the answer to both is fairly obvious but that doesn't mean it can't be given :)
    – Lightness Races in Orbit
    Nov 29 at 10:36














  • 13




    It's just a selfie.
    – Eric Duminil
    Nov 28 at 20:31






  • 4




    There is very little of the surface visible because the robot is in the way. Not sure what else there is to say! If you want to take a picture of the surface you will have to point the camera in a different direction... Maybe you want to rephrase your question, i.e. what exactly do you consider strange?
    – user2705196
    Nov 28 at 22:43






  • 9




    Why is so much InSight in sight?!
    – Joshua Ronis
    Nov 29 at 2:09










  • @user2705196 I guess the OP is wondering why the decision was made to (a) have a camera facing this way, and (b) why use this camera for introductory photography. Personally I think the answer to both is fairly obvious but that doesn't mean it can't be given :)
    – Lightness Races in Orbit
    Nov 29 at 10:36








13




13




It's just a selfie.
– Eric Duminil
Nov 28 at 20:31




It's just a selfie.
– Eric Duminil
Nov 28 at 20:31




4




4




There is very little of the surface visible because the robot is in the way. Not sure what else there is to say! If you want to take a picture of the surface you will have to point the camera in a different direction... Maybe you want to rephrase your question, i.e. what exactly do you consider strange?
– user2705196
Nov 28 at 22:43




There is very little of the surface visible because the robot is in the way. Not sure what else there is to say! If you want to take a picture of the surface you will have to point the camera in a different direction... Maybe you want to rephrase your question, i.e. what exactly do you consider strange?
– user2705196
Nov 28 at 22:43




9




9




Why is so much InSight in sight?!
– Joshua Ronis
Nov 29 at 2:09




Why is so much InSight in sight?!
– Joshua Ronis
Nov 29 at 2:09












@user2705196 I guess the OP is wondering why the decision was made to (a) have a camera facing this way, and (b) why use this camera for introductory photography. Personally I think the answer to both is fairly obvious but that doesn't mean it can't be given :)
– Lightness Races in Orbit
Nov 29 at 10:36




@user2705196 I guess the OP is wondering why the decision was made to (a) have a camera facing this way, and (b) why use this camera for introductory photography. Personally I think the answer to both is fairly obvious but that doesn't mean it can't be given :)
– Lightness Races in Orbit
Nov 29 at 10:36










2 Answers
2






active

oldest

votes

















up vote
30
down vote



accepted










That image was taken by the Instrument Deployment Camera (IDC). It's located on the arm. With the arm in stowed position, it's logical that a section of the deck is in view.



In other words, it's an engineering instrument, not a science instrument.






share|improve this answer



















  • 1




    While the cameras primary intent is find the best spots to place the instruments, InSight reused Pheonix's hardware design to the extent that the arm still has the digging scoop the latter used to look for ice under the surface. While not part of the primary mission, it leaves an opening for the camera to be used as a science instrument in the probable extended phase by having the arm attempt to dig a trench and imaging the results.
    – Dan Neely
    Nov 28 at 20:41


















up vote
13
down vote













To add to Hobbes' answer: InSight hasn't unpacked yet for its stay!



There is a lot of equipment which was packaged on top of the deck for transport, which will be moved to their proper places over the next weeks. The white tubing on the right and bottom edges of the picture is the robotic arm, to which this camera is attached to. The arm's grapple is in the bottom center. The metallic box on the left side is SEIS, which will be placed on the surface of the planet along with HP3.



There is a second camera (the ICC) below the deck, which would be unobstructed if not for a dust cover that has dust on it. This camera was more affected than the IDC by dust kicked up during landing, because this camera is below deck versus the IDC which is above-deck. You can make out a rock and a lander leg near the bottom of the image.



ICC image



The next steps are to active the arm and use it to remove the dust covers of both cameras. The ICC should give a nice panoramic view of the nearby terrain, unobstructed by the lander. The IDC is on the arm and will be moved to various vantage points to survey the terrain and get close-up images of the nearby objects, unobstructed by the lander.






share|improve this answer





















  • I saw this photo just few hours after the lander's touchdown. I still have my doubt: is this actually the raw image (B&W or colorful?) originally from the lander or it was computer-processed before publicly disclosed?
    – Boosted Nub
    Nov 29 at 4:58






  • 2




    The lander has two colour cameras, it's not a false-colour image - but I think I saw that photo posted on Twitter with a comment saying it was processed to enhance the contrast of the ground.
    – Robyn
    Nov 29 at 6:34










  • Of course, every photograph is false-colour to a degree! Although some colour profiles are more equal than others...
    – Lightness Races in Orbit
    Nov 29 at 10:37












  • Re: colours. There's probably a "calibration target", including for colour, on the probe somewhere. Compare space.stackexchange.com/q/2200/10450
    – Roger Lipscombe
    2 days ago






  • 1




    The InSight website at NASA has a section titled "Raw Images" and another titled "Images". The picture in my answer is a direct link to "Raw Images". Any image processing should be minimal, if at all. Both cameras are RGB color. Both have dust covers on, although I doubt that's affecting the color. The pictures are during Mars daytime, when the sky is orange; I think that's the greatest contributor to the color of the pictures.
    – Dr Sheldon
    2 days ago











Your Answer





StackExchange.ifUsing("editor", function () {
return StackExchange.using("mathjaxEditing", function () {
StackExchange.MarkdownEditor.creationCallbacks.add(function (editor, postfix) {
StackExchange.mathjaxEditing.prepareWmdForMathJax(editor, postfix, [["$", "$"], ["\\(","\\)"]]);
});
});
}, "mathjax-editing");

StackExchange.ready(function() {
var channelOptions = {
tags: "".split(" "),
id: "508"
};
initTagRenderer("".split(" "), "".split(" "), channelOptions);

StackExchange.using("externalEditor", function() {
// Have to fire editor after snippets, if snippets enabled
if (StackExchange.settings.snippets.snippetsEnabled) {
StackExchange.using("snippets", function() {
createEditor();
});
}
else {
createEditor();
}
});

function createEditor() {
StackExchange.prepareEditor({
heartbeatType: 'answer',
convertImagesToLinks: false,
noModals: true,
showLowRepImageUploadWarning: true,
reputationToPostImages: null,
bindNavPrevention: true,
postfix: "",
imageUploader: {
brandingHtml: "Powered by u003ca class="icon-imgur-white" href="https://imgur.com/"u003eu003c/au003e",
contentPolicyHtml: "User contributions licensed under u003ca href="https://creativecommons.org/licenses/by-sa/3.0/"u003ecc by-sa 3.0 with attribution requiredu003c/au003e u003ca href="https://stackoverflow.com/legal/content-policy"u003e(content policy)u003c/au003e",
allowUrls: true
},
noCode: true, onDemand: true,
discardSelector: ".discard-answer"
,immediatelyShowMarkdownHelp:true
});


}
});














draft saved

draft discarded


















StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f32389%2fwhy-is-so-much-of-insight-visible-in-this-image%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown

























2 Answers
2






active

oldest

votes








2 Answers
2






active

oldest

votes









active

oldest

votes






active

oldest

votes








up vote
30
down vote



accepted










That image was taken by the Instrument Deployment Camera (IDC). It's located on the arm. With the arm in stowed position, it's logical that a section of the deck is in view.



In other words, it's an engineering instrument, not a science instrument.






share|improve this answer



















  • 1




    While the cameras primary intent is find the best spots to place the instruments, InSight reused Pheonix's hardware design to the extent that the arm still has the digging scoop the latter used to look for ice under the surface. While not part of the primary mission, it leaves an opening for the camera to be used as a science instrument in the probable extended phase by having the arm attempt to dig a trench and imaging the results.
    – Dan Neely
    Nov 28 at 20:41















up vote
30
down vote



accepted










That image was taken by the Instrument Deployment Camera (IDC). It's located on the arm. With the arm in stowed position, it's logical that a section of the deck is in view.



In other words, it's an engineering instrument, not a science instrument.






share|improve this answer



















  • 1




    While the cameras primary intent is find the best spots to place the instruments, InSight reused Pheonix's hardware design to the extent that the arm still has the digging scoop the latter used to look for ice under the surface. While not part of the primary mission, it leaves an opening for the camera to be used as a science instrument in the probable extended phase by having the arm attempt to dig a trench and imaging the results.
    – Dan Neely
    Nov 28 at 20:41













up vote
30
down vote



accepted







up vote
30
down vote



accepted






That image was taken by the Instrument Deployment Camera (IDC). It's located on the arm. With the arm in stowed position, it's logical that a section of the deck is in view.



In other words, it's an engineering instrument, not a science instrument.






share|improve this answer














That image was taken by the Instrument Deployment Camera (IDC). It's located on the arm. With the arm in stowed position, it's logical that a section of the deck is in view.



In other words, it's an engineering instrument, not a science instrument.







share|improve this answer














share|improve this answer



share|improve this answer








edited Nov 29 at 6:45

























answered Nov 28 at 16:01









Hobbes

83.4k2231373




83.4k2231373








  • 1




    While the cameras primary intent is find the best spots to place the instruments, InSight reused Pheonix's hardware design to the extent that the arm still has the digging scoop the latter used to look for ice under the surface. While not part of the primary mission, it leaves an opening for the camera to be used as a science instrument in the probable extended phase by having the arm attempt to dig a trench and imaging the results.
    – Dan Neely
    Nov 28 at 20:41














  • 1




    While the cameras primary intent is find the best spots to place the instruments, InSight reused Pheonix's hardware design to the extent that the arm still has the digging scoop the latter used to look for ice under the surface. While not part of the primary mission, it leaves an opening for the camera to be used as a science instrument in the probable extended phase by having the arm attempt to dig a trench and imaging the results.
    – Dan Neely
    Nov 28 at 20:41








1




1




While the cameras primary intent is find the best spots to place the instruments, InSight reused Pheonix's hardware design to the extent that the arm still has the digging scoop the latter used to look for ice under the surface. While not part of the primary mission, it leaves an opening for the camera to be used as a science instrument in the probable extended phase by having the arm attempt to dig a trench and imaging the results.
– Dan Neely
Nov 28 at 20:41




While the cameras primary intent is find the best spots to place the instruments, InSight reused Pheonix's hardware design to the extent that the arm still has the digging scoop the latter used to look for ice under the surface. While not part of the primary mission, it leaves an opening for the camera to be used as a science instrument in the probable extended phase by having the arm attempt to dig a trench and imaging the results.
– Dan Neely
Nov 28 at 20:41










up vote
13
down vote













To add to Hobbes' answer: InSight hasn't unpacked yet for its stay!



There is a lot of equipment which was packaged on top of the deck for transport, which will be moved to their proper places over the next weeks. The white tubing on the right and bottom edges of the picture is the robotic arm, to which this camera is attached to. The arm's grapple is in the bottom center. The metallic box on the left side is SEIS, which will be placed on the surface of the planet along with HP3.



There is a second camera (the ICC) below the deck, which would be unobstructed if not for a dust cover that has dust on it. This camera was more affected than the IDC by dust kicked up during landing, because this camera is below deck versus the IDC which is above-deck. You can make out a rock and a lander leg near the bottom of the image.



ICC image



The next steps are to active the arm and use it to remove the dust covers of both cameras. The ICC should give a nice panoramic view of the nearby terrain, unobstructed by the lander. The IDC is on the arm and will be moved to various vantage points to survey the terrain and get close-up images of the nearby objects, unobstructed by the lander.






share|improve this answer





















  • I saw this photo just few hours after the lander's touchdown. I still have my doubt: is this actually the raw image (B&W or colorful?) originally from the lander or it was computer-processed before publicly disclosed?
    – Boosted Nub
    Nov 29 at 4:58






  • 2




    The lander has two colour cameras, it's not a false-colour image - but I think I saw that photo posted on Twitter with a comment saying it was processed to enhance the contrast of the ground.
    – Robyn
    Nov 29 at 6:34










  • Of course, every photograph is false-colour to a degree! Although some colour profiles are more equal than others...
    – Lightness Races in Orbit
    Nov 29 at 10:37












  • Re: colours. There's probably a "calibration target", including for colour, on the probe somewhere. Compare space.stackexchange.com/q/2200/10450
    – Roger Lipscombe
    2 days ago






  • 1




    The InSight website at NASA has a section titled "Raw Images" and another titled "Images". The picture in my answer is a direct link to "Raw Images". Any image processing should be minimal, if at all. Both cameras are RGB color. Both have dust covers on, although I doubt that's affecting the color. The pictures are during Mars daytime, when the sky is orange; I think that's the greatest contributor to the color of the pictures.
    – Dr Sheldon
    2 days ago















up vote
13
down vote













To add to Hobbes' answer: InSight hasn't unpacked yet for its stay!



There is a lot of equipment which was packaged on top of the deck for transport, which will be moved to their proper places over the next weeks. The white tubing on the right and bottom edges of the picture is the robotic arm, to which this camera is attached to. The arm's grapple is in the bottom center. The metallic box on the left side is SEIS, which will be placed on the surface of the planet along with HP3.



There is a second camera (the ICC) below the deck, which would be unobstructed if not for a dust cover that has dust on it. This camera was more affected than the IDC by dust kicked up during landing, because this camera is below deck versus the IDC which is above-deck. You can make out a rock and a lander leg near the bottom of the image.



ICC image



The next steps are to active the arm and use it to remove the dust covers of both cameras. The ICC should give a nice panoramic view of the nearby terrain, unobstructed by the lander. The IDC is on the arm and will be moved to various vantage points to survey the terrain and get close-up images of the nearby objects, unobstructed by the lander.






share|improve this answer





















  • I saw this photo just few hours after the lander's touchdown. I still have my doubt: is this actually the raw image (B&W or colorful?) originally from the lander or it was computer-processed before publicly disclosed?
    – Boosted Nub
    Nov 29 at 4:58






  • 2




    The lander has two colour cameras, it's not a false-colour image - but I think I saw that photo posted on Twitter with a comment saying it was processed to enhance the contrast of the ground.
    – Robyn
    Nov 29 at 6:34










  • Of course, every photograph is false-colour to a degree! Although some colour profiles are more equal than others...
    – Lightness Races in Orbit
    Nov 29 at 10:37












  • Re: colours. There's probably a "calibration target", including for colour, on the probe somewhere. Compare space.stackexchange.com/q/2200/10450
    – Roger Lipscombe
    2 days ago






  • 1




    The InSight website at NASA has a section titled "Raw Images" and another titled "Images". The picture in my answer is a direct link to "Raw Images". Any image processing should be minimal, if at all. Both cameras are RGB color. Both have dust covers on, although I doubt that's affecting the color. The pictures are during Mars daytime, when the sky is orange; I think that's the greatest contributor to the color of the pictures.
    – Dr Sheldon
    2 days ago













up vote
13
down vote










up vote
13
down vote









To add to Hobbes' answer: InSight hasn't unpacked yet for its stay!



There is a lot of equipment which was packaged on top of the deck for transport, which will be moved to their proper places over the next weeks. The white tubing on the right and bottom edges of the picture is the robotic arm, to which this camera is attached to. The arm's grapple is in the bottom center. The metallic box on the left side is SEIS, which will be placed on the surface of the planet along with HP3.



There is a second camera (the ICC) below the deck, which would be unobstructed if not for a dust cover that has dust on it. This camera was more affected than the IDC by dust kicked up during landing, because this camera is below deck versus the IDC which is above-deck. You can make out a rock and a lander leg near the bottom of the image.



ICC image



The next steps are to active the arm and use it to remove the dust covers of both cameras. The ICC should give a nice panoramic view of the nearby terrain, unobstructed by the lander. The IDC is on the arm and will be moved to various vantage points to survey the terrain and get close-up images of the nearby objects, unobstructed by the lander.






share|improve this answer












To add to Hobbes' answer: InSight hasn't unpacked yet for its stay!



There is a lot of equipment which was packaged on top of the deck for transport, which will be moved to their proper places over the next weeks. The white tubing on the right and bottom edges of the picture is the robotic arm, to which this camera is attached to. The arm's grapple is in the bottom center. The metallic box on the left side is SEIS, which will be placed on the surface of the planet along with HP3.



There is a second camera (the ICC) below the deck, which would be unobstructed if not for a dust cover that has dust on it. This camera was more affected than the IDC by dust kicked up during landing, because this camera is below deck versus the IDC which is above-deck. You can make out a rock and a lander leg near the bottom of the image.



ICC image



The next steps are to active the arm and use it to remove the dust covers of both cameras. The ICC should give a nice panoramic view of the nearby terrain, unobstructed by the lander. The IDC is on the arm and will be moved to various vantage points to survey the terrain and get close-up images of the nearby objects, unobstructed by the lander.







share|improve this answer












share|improve this answer



share|improve this answer










answered Nov 28 at 17:13









Dr Sheldon

4,0081342




4,0081342












  • I saw this photo just few hours after the lander's touchdown. I still have my doubt: is this actually the raw image (B&W or colorful?) originally from the lander or it was computer-processed before publicly disclosed?
    – Boosted Nub
    Nov 29 at 4:58






  • 2




    The lander has two colour cameras, it's not a false-colour image - but I think I saw that photo posted on Twitter with a comment saying it was processed to enhance the contrast of the ground.
    – Robyn
    Nov 29 at 6:34










  • Of course, every photograph is false-colour to a degree! Although some colour profiles are more equal than others...
    – Lightness Races in Orbit
    Nov 29 at 10:37












  • Re: colours. There's probably a "calibration target", including for colour, on the probe somewhere. Compare space.stackexchange.com/q/2200/10450
    – Roger Lipscombe
    2 days ago






  • 1




    The InSight website at NASA has a section titled "Raw Images" and another titled "Images". The picture in my answer is a direct link to "Raw Images". Any image processing should be minimal, if at all. Both cameras are RGB color. Both have dust covers on, although I doubt that's affecting the color. The pictures are during Mars daytime, when the sky is orange; I think that's the greatest contributor to the color of the pictures.
    – Dr Sheldon
    2 days ago


















  • I saw this photo just few hours after the lander's touchdown. I still have my doubt: is this actually the raw image (B&W or colorful?) originally from the lander or it was computer-processed before publicly disclosed?
    – Boosted Nub
    Nov 29 at 4:58






  • 2




    The lander has two colour cameras, it's not a false-colour image - but I think I saw that photo posted on Twitter with a comment saying it was processed to enhance the contrast of the ground.
    – Robyn
    Nov 29 at 6:34










  • Of course, every photograph is false-colour to a degree! Although some colour profiles are more equal than others...
    – Lightness Races in Orbit
    Nov 29 at 10:37












  • Re: colours. There's probably a "calibration target", including for colour, on the probe somewhere. Compare space.stackexchange.com/q/2200/10450
    – Roger Lipscombe
    2 days ago






  • 1




    The InSight website at NASA has a section titled "Raw Images" and another titled "Images". The picture in my answer is a direct link to "Raw Images". Any image processing should be minimal, if at all. Both cameras are RGB color. Both have dust covers on, although I doubt that's affecting the color. The pictures are during Mars daytime, when the sky is orange; I think that's the greatest contributor to the color of the pictures.
    – Dr Sheldon
    2 days ago
















I saw this photo just few hours after the lander's touchdown. I still have my doubt: is this actually the raw image (B&W or colorful?) originally from the lander or it was computer-processed before publicly disclosed?
– Boosted Nub
Nov 29 at 4:58




I saw this photo just few hours after the lander's touchdown. I still have my doubt: is this actually the raw image (B&W or colorful?) originally from the lander or it was computer-processed before publicly disclosed?
– Boosted Nub
Nov 29 at 4:58




2




2




The lander has two colour cameras, it's not a false-colour image - but I think I saw that photo posted on Twitter with a comment saying it was processed to enhance the contrast of the ground.
– Robyn
Nov 29 at 6:34




The lander has two colour cameras, it's not a false-colour image - but I think I saw that photo posted on Twitter with a comment saying it was processed to enhance the contrast of the ground.
– Robyn
Nov 29 at 6:34












Of course, every photograph is false-colour to a degree! Although some colour profiles are more equal than others...
– Lightness Races in Orbit
Nov 29 at 10:37






Of course, every photograph is false-colour to a degree! Although some colour profiles are more equal than others...
– Lightness Races in Orbit
Nov 29 at 10:37














Re: colours. There's probably a "calibration target", including for colour, on the probe somewhere. Compare space.stackexchange.com/q/2200/10450
– Roger Lipscombe
2 days ago




Re: colours. There's probably a "calibration target", including for colour, on the probe somewhere. Compare space.stackexchange.com/q/2200/10450
– Roger Lipscombe
2 days ago




1




1




The InSight website at NASA has a section titled "Raw Images" and another titled "Images". The picture in my answer is a direct link to "Raw Images". Any image processing should be minimal, if at all. Both cameras are RGB color. Both have dust covers on, although I doubt that's affecting the color. The pictures are during Mars daytime, when the sky is orange; I think that's the greatest contributor to the color of the pictures.
– Dr Sheldon
2 days ago




The InSight website at NASA has a section titled "Raw Images" and another titled "Images". The picture in my answer is a direct link to "Raw Images". Any image processing should be minimal, if at all. Both cameras are RGB color. Both have dust covers on, although I doubt that's affecting the color. The pictures are during Mars daytime, when the sky is orange; I think that's the greatest contributor to the color of the pictures.
– Dr Sheldon
2 days ago


















draft saved

draft discarded




















































Thanks for contributing an answer to Space Exploration Stack Exchange!


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


Use MathJax to format equations. MathJax reference.


To learn more, see our tips on writing great answers.





Some of your past answers have not been well-received, and you're in danger of being blocked from answering.


Please pay close attention to the following guidance:


  • Please be sure to answer the question. Provide details and share your research!

But avoid



  • Asking for help, clarification, or responding to other answers.

  • Making statements based on opinion; back them up with references or personal experience.


To learn more, see our tips on writing great answers.




draft saved


draft discarded














StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fspace.stackexchange.com%2fquestions%2f32389%2fwhy-is-so-much-of-insight-visible-in-this-image%23new-answer', 'question_page');
}
);

Post as a guest















Required, but never shown





















































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown

































Required, but never shown














Required, but never shown












Required, but never shown







Required, but never shown







Popular posts from this blog

AnyDesk - Fatal Program Failure

How to calibrate 16:9 built-in touch-screen to a 4:3 resolution?

QoS: MAC-Priority for clients behind a repeater