Stuck with spinning gear (NOT beach ball) after OSX login
up vote
2
down vote
favorite
Running latest OS X Mountain Lion. I shut down hard (held power button until power off) after an application froze and rather than doing force quit I got frustrated and just shut the system down.
Reboot, get to login screen and enter password. Get spinning gear (NOT the beachball) which never stops and login never completes.
Unable to get past this.
macos boot
add a comment |
up vote
2
down vote
favorite
Running latest OS X Mountain Lion. I shut down hard (held power button until power off) after an application froze and rather than doing force quit I got frustrated and just shut the system down.
Reboot, get to login screen and enter password. Get spinning gear (NOT the beachball) which never stops and login never completes.
Unable to get past this.
macos boot
Some of your notes suggest you using FileVault 2 (full-volume encryption); is this correct? If so, the "login screen" you're referring to is actually the pre-boot authentication screen, which is quite different (and the Safari-only "Guest" account isn't really an account at all).
– Gordon Davisson
Mar 29 '13 at 23:20
add a comment |
up vote
2
down vote
favorite
up vote
2
down vote
favorite
Running latest OS X Mountain Lion. I shut down hard (held power button until power off) after an application froze and rather than doing force quit I got frustrated and just shut the system down.
Reboot, get to login screen and enter password. Get spinning gear (NOT the beachball) which never stops and login never completes.
Unable to get past this.
macos boot
Running latest OS X Mountain Lion. I shut down hard (held power button until power off) after an application froze and rather than doing force quit I got frustrated and just shut the system down.
Reboot, get to login screen and enter password. Get spinning gear (NOT the beachball) which never stops and login never completes.
Unable to get past this.
macos boot
macos boot
edited Sep 30 '16 at 6:22
fixer1234
17.4k144281
17.4k144281
asked Mar 29 '13 at 3:33
Howiecamp
78372546
78372546
Some of your notes suggest you using FileVault 2 (full-volume encryption); is this correct? If so, the "login screen" you're referring to is actually the pre-boot authentication screen, which is quite different (and the Safari-only "Guest" account isn't really an account at all).
– Gordon Davisson
Mar 29 '13 at 23:20
add a comment |
Some of your notes suggest you using FileVault 2 (full-volume encryption); is this correct? If so, the "login screen" you're referring to is actually the pre-boot authentication screen, which is quite different (and the Safari-only "Guest" account isn't really an account at all).
– Gordon Davisson
Mar 29 '13 at 23:20
Some of your notes suggest you using FileVault 2 (full-volume encryption); is this correct? If so, the "login screen" you're referring to is actually the pre-boot authentication screen, which is quite different (and the Safari-only "Guest" account isn't really an account at all).
– Gordon Davisson
Mar 29 '13 at 23:20
Some of your notes suggest you using FileVault 2 (full-volume encryption); is this correct? If so, the "login screen" you're referring to is actually the pre-boot authentication screen, which is quite different (and the Safari-only "Guest" account isn't really an account at all).
– Gordon Davisson
Mar 29 '13 at 23:20
add a comment |
5 Answers
5
active
oldest
votes
up vote
0
down vote
Your operating system is quite possibly damaged, which would likely require a reinstall. If that's the case, you'll need to look into backing up your data if you haven't already. Then you can boot from an OS X disc by holding "option" during boot.
Basic hardware and system troubleshooting steps are also listed in this article:
https://discussions.apple.com/thread/1515281?start=0&tstart=0
One observation is that I am able to log on as the Guest user and get a browser-only environment. Could this then be user profile-specific, and I could try logging on as root? Also regarding backing up the data, I am running Filevault but I assume there is a way to mount a Filevault volume as an external drive.
– Howiecamp
Mar 29 '13 at 4:05
If you're able to log in as guest, you may also want to try opening Disk Utility and running a verify or repair on the OS disk.
– JimNim
Mar 29 '13 at 20:32
add a comment |
up vote
0
down vote
There is a nice website that maybe helpful for you: http://www.cultofmac.com/50685/how-to-fix-common-mac-startup-problems-macrx/
It says about the spinning gear:
Apple Logo with Spinning Gear
Once the spinning gear appears the BSD kernel (Darwin) has assumed command and begins loading device drivers. Shortly thereafter it transfers command to the almighty (and controversial) launchd process. Such are the workings of UNIX.
What this means for us mortals is that when a Mac stalls at the Apple logo or the logo with a spinning gear, it probably has a corrupt Mac OS X installation. It may also be having trouble accessing an internal or external hardware component, but this is less-likely.
Rebooting your Mac in Safe Mode can sometimes get things working well-enough that a second, normal reboot then works normally Hold down the Shift key at startup to boot in Safe Mode. DiskWarrior is also worth a shot (this is by far my most used disk utility). If that doesn’t work, an Archive & Install may be needed.
Hope this helps....
add a comment |
up vote
0
down vote
Try logging in as a guest user, then logging straight back out and logging in as the proper user. Works for me (my machine often, but not always, stalls after entering login details).
add a comment |
up vote
0
down vote
You could also, if you feel comfortable, manually boot into Single User Mode (Command + S right when you boot) and then run fsck -y
to check the boot device for issues. Then try mount -uw /
. Then if that works, simply type reboot and see if it works (fsck stands for "File System ChecK", so if you did a hard reboot you may have caused some issues with the file system)
add a comment |
up vote
0
down vote
- Log In as Guest;
- Go to System Preferences > Users & Groups and Unlock;
- Create a new Administrator user (optionally delete the old one);
- Log Out and back in with the new user;
If you choose to delete the old user, it should ask you whether you want to backup that user's files (home dir), otherwise make sure to backup what you need from that user's home dir.
It doesn't login with Guest too
– RezaRahmati
Jun 15 '17 at 18:07
add a comment |
5 Answers
5
active
oldest
votes
5 Answers
5
active
oldest
votes
active
oldest
votes
active
oldest
votes
up vote
0
down vote
Your operating system is quite possibly damaged, which would likely require a reinstall. If that's the case, you'll need to look into backing up your data if you haven't already. Then you can boot from an OS X disc by holding "option" during boot.
Basic hardware and system troubleshooting steps are also listed in this article:
https://discussions.apple.com/thread/1515281?start=0&tstart=0
One observation is that I am able to log on as the Guest user and get a browser-only environment. Could this then be user profile-specific, and I could try logging on as root? Also regarding backing up the data, I am running Filevault but I assume there is a way to mount a Filevault volume as an external drive.
– Howiecamp
Mar 29 '13 at 4:05
If you're able to log in as guest, you may also want to try opening Disk Utility and running a verify or repair on the OS disk.
– JimNim
Mar 29 '13 at 20:32
add a comment |
up vote
0
down vote
Your operating system is quite possibly damaged, which would likely require a reinstall. If that's the case, you'll need to look into backing up your data if you haven't already. Then you can boot from an OS X disc by holding "option" during boot.
Basic hardware and system troubleshooting steps are also listed in this article:
https://discussions.apple.com/thread/1515281?start=0&tstart=0
One observation is that I am able to log on as the Guest user and get a browser-only environment. Could this then be user profile-specific, and I could try logging on as root? Also regarding backing up the data, I am running Filevault but I assume there is a way to mount a Filevault volume as an external drive.
– Howiecamp
Mar 29 '13 at 4:05
If you're able to log in as guest, you may also want to try opening Disk Utility and running a verify or repair on the OS disk.
– JimNim
Mar 29 '13 at 20:32
add a comment |
up vote
0
down vote
up vote
0
down vote
Your operating system is quite possibly damaged, which would likely require a reinstall. If that's the case, you'll need to look into backing up your data if you haven't already. Then you can boot from an OS X disc by holding "option" during boot.
Basic hardware and system troubleshooting steps are also listed in this article:
https://discussions.apple.com/thread/1515281?start=0&tstart=0
Your operating system is quite possibly damaged, which would likely require a reinstall. If that's the case, you'll need to look into backing up your data if you haven't already. Then you can boot from an OS X disc by holding "option" during boot.
Basic hardware and system troubleshooting steps are also listed in this article:
https://discussions.apple.com/thread/1515281?start=0&tstart=0
answered Mar 29 '13 at 3:46
JimNim
145212
145212
One observation is that I am able to log on as the Guest user and get a browser-only environment. Could this then be user profile-specific, and I could try logging on as root? Also regarding backing up the data, I am running Filevault but I assume there is a way to mount a Filevault volume as an external drive.
– Howiecamp
Mar 29 '13 at 4:05
If you're able to log in as guest, you may also want to try opening Disk Utility and running a verify or repair on the OS disk.
– JimNim
Mar 29 '13 at 20:32
add a comment |
One observation is that I am able to log on as the Guest user and get a browser-only environment. Could this then be user profile-specific, and I could try logging on as root? Also regarding backing up the data, I am running Filevault but I assume there is a way to mount a Filevault volume as an external drive.
– Howiecamp
Mar 29 '13 at 4:05
If you're able to log in as guest, you may also want to try opening Disk Utility and running a verify or repair on the OS disk.
– JimNim
Mar 29 '13 at 20:32
One observation is that I am able to log on as the Guest user and get a browser-only environment. Could this then be user profile-specific, and I could try logging on as root? Also regarding backing up the data, I am running Filevault but I assume there is a way to mount a Filevault volume as an external drive.
– Howiecamp
Mar 29 '13 at 4:05
One observation is that I am able to log on as the Guest user and get a browser-only environment. Could this then be user profile-specific, and I could try logging on as root? Also regarding backing up the data, I am running Filevault but I assume there is a way to mount a Filevault volume as an external drive.
– Howiecamp
Mar 29 '13 at 4:05
If you're able to log in as guest, you may also want to try opening Disk Utility and running a verify or repair on the OS disk.
– JimNim
Mar 29 '13 at 20:32
If you're able to log in as guest, you may also want to try opening Disk Utility and running a verify or repair on the OS disk.
– JimNim
Mar 29 '13 at 20:32
add a comment |
up vote
0
down vote
There is a nice website that maybe helpful for you: http://www.cultofmac.com/50685/how-to-fix-common-mac-startup-problems-macrx/
It says about the spinning gear:
Apple Logo with Spinning Gear
Once the spinning gear appears the BSD kernel (Darwin) has assumed command and begins loading device drivers. Shortly thereafter it transfers command to the almighty (and controversial) launchd process. Such are the workings of UNIX.
What this means for us mortals is that when a Mac stalls at the Apple logo or the logo with a spinning gear, it probably has a corrupt Mac OS X installation. It may also be having trouble accessing an internal or external hardware component, but this is less-likely.
Rebooting your Mac in Safe Mode can sometimes get things working well-enough that a second, normal reboot then works normally Hold down the Shift key at startup to boot in Safe Mode. DiskWarrior is also worth a shot (this is by far my most used disk utility). If that doesn’t work, an Archive & Install may be needed.
Hope this helps....
add a comment |
up vote
0
down vote
There is a nice website that maybe helpful for you: http://www.cultofmac.com/50685/how-to-fix-common-mac-startup-problems-macrx/
It says about the spinning gear:
Apple Logo with Spinning Gear
Once the spinning gear appears the BSD kernel (Darwin) has assumed command and begins loading device drivers. Shortly thereafter it transfers command to the almighty (and controversial) launchd process. Such are the workings of UNIX.
What this means for us mortals is that when a Mac stalls at the Apple logo or the logo with a spinning gear, it probably has a corrupt Mac OS X installation. It may also be having trouble accessing an internal or external hardware component, but this is less-likely.
Rebooting your Mac in Safe Mode can sometimes get things working well-enough that a second, normal reboot then works normally Hold down the Shift key at startup to boot in Safe Mode. DiskWarrior is also worth a shot (this is by far my most used disk utility). If that doesn’t work, an Archive & Install may be needed.
Hope this helps....
add a comment |
up vote
0
down vote
up vote
0
down vote
There is a nice website that maybe helpful for you: http://www.cultofmac.com/50685/how-to-fix-common-mac-startup-problems-macrx/
It says about the spinning gear:
Apple Logo with Spinning Gear
Once the spinning gear appears the BSD kernel (Darwin) has assumed command and begins loading device drivers. Shortly thereafter it transfers command to the almighty (and controversial) launchd process. Such are the workings of UNIX.
What this means for us mortals is that when a Mac stalls at the Apple logo or the logo with a spinning gear, it probably has a corrupt Mac OS X installation. It may also be having trouble accessing an internal or external hardware component, but this is less-likely.
Rebooting your Mac in Safe Mode can sometimes get things working well-enough that a second, normal reboot then works normally Hold down the Shift key at startup to boot in Safe Mode. DiskWarrior is also worth a shot (this is by far my most used disk utility). If that doesn’t work, an Archive & Install may be needed.
Hope this helps....
There is a nice website that maybe helpful for you: http://www.cultofmac.com/50685/how-to-fix-common-mac-startup-problems-macrx/
It says about the spinning gear:
Apple Logo with Spinning Gear
Once the spinning gear appears the BSD kernel (Darwin) has assumed command and begins loading device drivers. Shortly thereafter it transfers command to the almighty (and controversial) launchd process. Such are the workings of UNIX.
What this means for us mortals is that when a Mac stalls at the Apple logo or the logo with a spinning gear, it probably has a corrupt Mac OS X installation. It may also be having trouble accessing an internal or external hardware component, but this is less-likely.
Rebooting your Mac in Safe Mode can sometimes get things working well-enough that a second, normal reboot then works normally Hold down the Shift key at startup to boot in Safe Mode. DiskWarrior is also worth a shot (this is by far my most used disk utility). If that doesn’t work, an Archive & Install may be needed.
Hope this helps....
answered Mar 29 '13 at 3:47
Vincent
818614
818614
add a comment |
add a comment |
up vote
0
down vote
Try logging in as a guest user, then logging straight back out and logging in as the proper user. Works for me (my machine often, but not always, stalls after entering login details).
add a comment |
up vote
0
down vote
Try logging in as a guest user, then logging straight back out and logging in as the proper user. Works for me (my machine often, but not always, stalls after entering login details).
add a comment |
up vote
0
down vote
up vote
0
down vote
Try logging in as a guest user, then logging straight back out and logging in as the proper user. Works for me (my machine often, but not always, stalls after entering login details).
Try logging in as a guest user, then logging straight back out and logging in as the proper user. Works for me (my machine often, but not always, stalls after entering login details).
answered Oct 16 '14 at 18:13
Rod
111
111
add a comment |
add a comment |
up vote
0
down vote
You could also, if you feel comfortable, manually boot into Single User Mode (Command + S right when you boot) and then run fsck -y
to check the boot device for issues. Then try mount -uw /
. Then if that works, simply type reboot and see if it works (fsck stands for "File System ChecK", so if you did a hard reboot you may have caused some issues with the file system)
add a comment |
up vote
0
down vote
You could also, if you feel comfortable, manually boot into Single User Mode (Command + S right when you boot) and then run fsck -y
to check the boot device for issues. Then try mount -uw /
. Then if that works, simply type reboot and see if it works (fsck stands for "File System ChecK", so if you did a hard reboot you may have caused some issues with the file system)
add a comment |
up vote
0
down vote
up vote
0
down vote
You could also, if you feel comfortable, manually boot into Single User Mode (Command + S right when you boot) and then run fsck -y
to check the boot device for issues. Then try mount -uw /
. Then if that works, simply type reboot and see if it works (fsck stands for "File System ChecK", so if you did a hard reboot you may have caused some issues with the file system)
You could also, if you feel comfortable, manually boot into Single User Mode (Command + S right when you boot) and then run fsck -y
to check the boot device for issues. Then try mount -uw /
. Then if that works, simply type reboot and see if it works (fsck stands for "File System ChecK", so if you did a hard reboot you may have caused some issues with the file system)
answered May 11 '15 at 1:38
steelcowboy
263
263
add a comment |
add a comment |
up vote
0
down vote
- Log In as Guest;
- Go to System Preferences > Users & Groups and Unlock;
- Create a new Administrator user (optionally delete the old one);
- Log Out and back in with the new user;
If you choose to delete the old user, it should ask you whether you want to backup that user's files (home dir), otherwise make sure to backup what you need from that user's home dir.
It doesn't login with Guest too
– RezaRahmati
Jun 15 '17 at 18:07
add a comment |
up vote
0
down vote
- Log In as Guest;
- Go to System Preferences > Users & Groups and Unlock;
- Create a new Administrator user (optionally delete the old one);
- Log Out and back in with the new user;
If you choose to delete the old user, it should ask you whether you want to backup that user's files (home dir), otherwise make sure to backup what you need from that user's home dir.
It doesn't login with Guest too
– RezaRahmati
Jun 15 '17 at 18:07
add a comment |
up vote
0
down vote
up vote
0
down vote
- Log In as Guest;
- Go to System Preferences > Users & Groups and Unlock;
- Create a new Administrator user (optionally delete the old one);
- Log Out and back in with the new user;
If you choose to delete the old user, it should ask you whether you want to backup that user's files (home dir), otherwise make sure to backup what you need from that user's home dir.
- Log In as Guest;
- Go to System Preferences > Users & Groups and Unlock;
- Create a new Administrator user (optionally delete the old one);
- Log Out and back in with the new user;
If you choose to delete the old user, it should ask you whether you want to backup that user's files (home dir), otherwise make sure to backup what you need from that user's home dir.
answered Nov 27 '16 at 15:05
Alex Sf.
13718
13718
It doesn't login with Guest too
– RezaRahmati
Jun 15 '17 at 18:07
add a comment |
It doesn't login with Guest too
– RezaRahmati
Jun 15 '17 at 18:07
It doesn't login with Guest too
– RezaRahmati
Jun 15 '17 at 18:07
It doesn't login with Guest too
– RezaRahmati
Jun 15 '17 at 18:07
add a comment |
Thanks for contributing an answer to Super User!
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Some of your past answers have not been well-received, and you're in danger of being blocked from answering.
Please pay close attention to the following guidance:
- Please be sure to answer the question. Provide details and share your research!
But avoid …
- Asking for help, clarification, or responding to other answers.
- Making statements based on opinion; back them up with references or personal experience.
To learn more, see our tips on writing great answers.
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
StackExchange.ready(
function () {
StackExchange.openid.initPostLogin('.new-post-login', 'https%3a%2f%2fsuperuser.com%2fquestions%2f575069%2fstuck-with-spinning-gear-not-beach-ball-after-osx-login%23new-answer', 'question_page');
}
);
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Sign up or log in
StackExchange.ready(function () {
StackExchange.helpers.onClickDraftSave('#login-link');
});
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Sign up using Google
Sign up using Facebook
Sign up using Email and Password
Post as a guest
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Required, but never shown
Some of your notes suggest you using FileVault 2 (full-volume encryption); is this correct? If so, the "login screen" you're referring to is actually the pre-boot authentication screen, which is quite different (and the Safari-only "Guest" account isn't really an account at all).
– Gordon Davisson
Mar 29 '13 at 23:20